Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Boom/Stick Option (HEX) 1 | 9 m (31 ft) |
Breakout force - ISO | 229,305 lbs (104,011 kg) |
Bucket Digging Force - ISO | 195,584 lbs (88,715 kg) |
Ground Pressure | 35.7 psi |
Max Digging Depth | 31 ft (10 m) |
Max. teeth height | 606 ft (185 m) |
Max.Dumping Height | 34 ft (10 m) |
Maximum Reach at Ground Level | 54 ft (16 m) |
Stick length | 14 ft (4 m) |
Boom/Stick Option (HEX) 3 | 7 m (22 ft) |
Breakout force-ISO | 224,809 lbs (101,972 kg) |
Ground pressure | 5.4 psi |
Max bucket opening width | 8 ft (2 m) |
Max. crowd force | 287,756 lbs (130,524 kg) |
Max. crowd force at ground level (ISO 6015) | 223,685 lbs (101,462 kg) |
Max. crowd length | 17 ft (5 m) |
Max.Dumping Height | 37 ft (11 m) |
Maximum Reach at Ground Level | 45 ft (14 m) |
Stick length | 14 ft (4 m) |
Fuel Tank | 1,825 gal (6,908 l) |
Hydraulic system | 1,110 gal (4,200 l) |
Hydraulic Tank | 581 gal (2,200 l) |
Overall height with ROPS | 7,800 mm (307 in) |
Overall length - bucket level on ground | 726 in (1,845 cm) |
Overall width | 6,410 mm (252 in) |
Track Width | 197 in (500 cm) |
Wheelbase | 21 ft (6 m) |
Batteries | 4 (+ 2) x 170 Ah / 12 V |
Voltage | 24 V |
Air cleaner | Dry-type air cleaner with pre-cleaner with automatic dust ejector primary and safety elements |
Alternator | 260 amps |
Bore | 6 in (16 cm) |
Cooling method | Fans driven via hydraulic piston motor |
Displacement | 2,746 cu in (45,001 cu cm) |
Engine Model | Cummins QSK45 |
Engine Type | 12 cylinder turbocharged V-engine after-cooler two separate water cooling circuits direct injection system |
Rated engine speed | 1800 rpm |
Rated power | 1,502 hp (1,120 kw) |
Stroke | 8 in (19 cm) |
Maximum system pressure | 736.3 psi |
Pump Flow | 797 gpm (3,016 lpm) |
Operating Weight - 6wd | 666,001 lbs (302,093 kg) |
Shovel Capacity | 24 cu yd (18 cu m) |
Standard bucket capacity- SAE | 24 cu yd (18 cu m) |
Hydraulic motors and drives | 2 Liebherr axial piston motors |
Swing gear | 2 Liebherr planetary reduction gears |
Swing ring teeth | Liebherr sealed triple roller swing ring internal teeth |
Swing speed | 3.9 rpm |