Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Blade cutting depth | 2 ft (1 m) |
Blade ground clearance | 2 ft (0 m) |
Blade Tip Angle - Front | 46 degrees |
Blade Tip Angle - Rear | 13 degrees |
Diameter | 67 in (169 cm) |
Rotation | 360 degrees |
Shift Left | 18 in (45 cm) |
Blade Base | 9 ft (3 m) |
Overall Height with cab | 12 ft (4 m) |
Overall Length | 29 ft (9 m) |
Overall width | 9 ft (3 m) |
Tread width | 91 in (231 cm) |
Wheelbase | 21 ft (6 m) |
Aspiration | Turbocharged |
Bore | 5 in (13 cm) |
Displacement | 610 cu in (10,001 cu cm) |
Engine Model | LT-10-C |
Gross horsepower | 215 hp (160 kw) |
Net Power | 200 hp (149 kw) |
Number of Cylinders | 6 |
Power Measured @ | 2100 rpm |
Stroke | 5 in (14 cm) |
Torque Measured @ | 1300 rpm |
Ground Clearance | 2 ft (1 m) |
Oscillation - Total | 16 degrees |
Wheel Lean | 18 degrees |
Pump Flow | 48 gpm (182 lpm) |
Relief Valve Pressure | 2500 psi |
Moldboard Height | 31 in (79 cm) |
Moldboard Thickness | 1 in (3 cm) |
Moldboard Width | 14 ft (4 m) |
Cooling System Fluid Capacity | 11 gal (41 l) |
Fuel Capacity | 100 gal (379 l) |
Hydraulic System Fluid Capacity | 24 gal (90 l) |
Oil System Fluid Capacity | 10 gal (39 l) |
Rear Diff/Final Drive Fluid Capacity | 9 gal (34 l) |
Std Operation Weight - Front Axle | 11,950 lbs (5,420 kg) |
Std Operation Weight - Rear Axle | 26,250 lbs (11,907 kg) |
Std Operation Weight - Total | 38,200 lbs (17,327 kg) |
Tandem Case Fluid Capacity (each) | 27 gal (100 l) |
Tire Size | 16.00 * 24 G-2 |
Transmission Fluid Capacity | 10 gal (39 l) |
Articulation Angle | 22 degrees |
Turning Radius | 26 ft (8 m) |
Max Speed - Forward | 24 mph (39 kph) |
Max Speed - Reverse | 17 mph (28 kph) |
Number of Gears - Forward | 8 |
Number of Gears - Reverse | 4 |
Transmission Type | Powershift |