Categories ↠ Motor Graders ↠ John Deere 672CH

John Deere 672CH Motor Grader

Category: Motor Graders ➔
Manufacturer: John Deere ➔
Model: 672CH ➔

The John Deere 672CH Motor Grader is a powerful and versatile machine designed for grading and leveling tasks on construction sites. With a turbocharged engine providing up to 198 horsepower, this motor grader offers exceptional performance and precision. Equipped with a 12-foot moldboard blade, hydraulic system with a flow rate of 45.6 gpm, and a maximum operating weight of 37,050 lbs, the 672CH is ideal for a wide range of road maintenance and earthmoving projects. Explore the detailed specifications to discover the capabilities of this reliable and efficient motor grader.

See all John Deere 672CHs for sale

General Specifications

Circle

Blade Tip Angle - Front	49 degrees
Blade Tip Angle - Rear	5 degrees
Diameter	60 in (152 cm)
Max Lift Above Ground	18 in (44 cm)
Max Reach Outside Tires - Left	85 in (216 cm)
Max Reach Outside Tires - Right	83 in (211 cm)
Rotation	360 degrees
Shift Left	31 in (79 cm)
Shift Right	29 in (73 cm)

Dimensions

Blade Base	9 ft (3 m)
Front Ground Clearance	2 ft (1 m)
Height to Top of Isomount Cab	10 ft (3 m)
Overall Length	28 ft (9 m)
Tandem Axle Wheelbase	5 ft (2 m)
Wheelbase	20 ft (6 m)
Width Over Tires	8 ft (2 m)

Engine

Aspiration	Turbocharged with Aftercooler
Displacement	414 cu in (6,784 cu cm)
Engine Model	6068H
Max Power	198 hp (148 kw)
Net Power Gear 1-2	145 hp (108 kw)
Net Power Gear 4-6	178 hp (133 kw)
Net Power Gear 5-6	198 hp (148 kw)
Net Power Gears 7-8	198 hp (148 kw)
Net Torque Gears 1-2	554 lbs ft (751 nm)
Net Torque Gears 3-4	611 lbs ft (828 nm)
Net Torque Gears 5-6	625 lbs ft (847 nm)
Net Torque Gears 7-8	625 lbs ft (847 nm)
Number of Cylinders	6
Power Measured @	2000 rpm
Torque Measured @	1000 rpm

Front Axle

Ground Clearance	2 ft (1 m)
Oscillation - Total	32 degrees
Wheel Lean	20 degrees

Hydraulic System

Pump Flow	46 gpm (173 lpm)
Pump Type	Closed center variable displacement
Relief Valve Pressure	2550 psi

Moldboard

Blade Pull at Max Weight	39,310 lbs (17,831 kg)
Moldboard Height	24 in (61 cm)
Moldboard Thickness	1 in (2 cm)
Moldboard Width	12 ft (4 m)
Side Shift Left	27 in (68 cm)
Side Shift Right	27 in (68 cm)

Operating Specifications

Alternator Supplied Amperage	55 amps
Circle Gearbox Fluid Capacity	4 gal (15 l)
Cooling System Fluid Capacity	11 gal (42 l)
Fuel Capacity	106 gal (401 l)
Hydraulic System Fluid Capacity	16 gal (59 l)
Max Operation Weight - Front Axle	11,180 lbs (5,071 kg)
Max Operation Weight - Rear Axle	25,870 lbs (11,734 kg)
Max Operation Weight - Total	37,050 lbs (16,806 kg)
Oil System Fluid Capacity	6 gal (24 l)
Operating Voltage	24 volts
Rear Diff/Final Drive Fluid Capacity	10 gal (36 l)
Std Operation Weight - Front Axle	10,060 lbs (4,563 kg)
Std Operation Weight - Rear Axle	22,260 lbs (10,097 kg)
Std Operation Weight - Total	32,320 lbs (14,660 kg)
Tandem Case Fluid Capacity (each)	20 gal (76 l)
Tire Size	13.00-24
Transmission Fluid Capacity	10 gal (38 l)

Steering System

Articulation Angle	25 degrees
Turning Radius	23 ft (7 m)

Transmission

Max Speed - Forward	25 mph (40 kph)
Max Speed - Reverse	25 mph (40 kph)
Number of Gears - Forward	8
Number of Gears - Reverse	8
Transmission Type	Power Shift

John Deere 672CHs currently for sale

A John Deere 672CH From Foley Equipment for $59,800.00 USD

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon