Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
The John Deere 770CH Motor Grader boasts impressive features and specifications that make it a powerful and reliable machine for various construction and road maintenance tasks. With a robust engine providing 205 horsepower, a 12-foot moldboard width, and a smooth hydraulic system, this motor grader is equipped to handle even the toughest grading projects with ease and efficiency. Its advanced transmission, steering system, and circle blade design ensure precision and control, making the John Deere 770CH an essential asset for any heavy equipment fleet.
Blade Tip Angle - Front | 49 degrees |
Blade Tip Angle - Rear | 5 degrees |
Diameter | 60 in (152 cm) |
Max Lift Above Ground | 19 in (47 cm) |
Max Reach Outside Tires - Left | 85 in (216 cm) |
Max Reach Outside Tires - Right | 83 in (211 cm) |
Rotation | 360 degrees |
Shift Left | 31 in (79 cm) |
Shift Right | 29 in (73 cm) |
Blade Base | 9 ft (3 m) |
Front Ground Clearance | 2 ft (1 m) |
Height to Top of Isomount Cab | 10 ft (3 m) |
Overall Length | 28 ft (9 m) |
Tandem Axle Wheelbase | 5 ft (2 m) |
Wheelbase | 20 ft (6 m) |
Width Over Tires | 8 ft (3 m) |
Aspiration | Turbocharged with Aftercooler |
Displacement | 494 cu in (8,095 cu cm) |
Engine Model | 6081H |
Max Power | 205 hp (153 kw) |
Net Power Gear 1-2 | 165 hp (123 kw) |
Net Power Gear 4-6 | 185 hp (138 kw) |
Net Power Gear 5-6 | 205 hp (153 kw) |
Net Power Gears 7-8 | 205 hp (153 kw) |
Net Torque Gears 1-2 | 570 lbs ft (773 nm) |
Net Torque Gears 3-4 | 680 lbs ft (922 nm) |
Net Torque Gears 5-6 | 682 lbs ft (925 nm) |
Net Torque Gears 7-8 | 682 lbs ft (925 nm) |
Number of Cylinders | 6 |
Power Measured @ | 1900 rpm |
Torque Measured @ | 900 rpm |
Ground Clearance | 2 ft (1 m) |
Oscillation - Total | 32 degrees |
Wheel Lean | 20 degrees |
Pump Flow | 55 gpm (207 lpm) |
Pump Type | Closed Center Variable displacement |
Relief Valve Pressure | 2550 psi |
Blade Pull at Max Weight | 27,990 lbs (12,696 kg) |
Moldboard Height | 24 in (61 cm) |
Moldboard Thickness | 1 in (2 cm) |
Moldboard Width | 12 ft (4 m) |
Side Shift Left | 27 in (68 cm) |
Side Shift Right | 27 in (68 cm) |
Alternator Supplied Amperage | 55 amps |
Circle Gearbox Fluid Capacity | 1 gal (4 l) |
Cooling System Fluid Capacity | 12 gal (45 l) |
Fuel Capacity | 106 gal (401 l) |
Hydraulic System Fluid Capacity | 16 gal (59 l) |
Max Operation Weight - Front Axle | 9,910 lbs (4,495 kg) |
Max Operation Weight - Rear Axle | 26,320 lbs (11,939 kg) |
Max Operation Weight - Total | 36,230 lbs (16,434 kg) |
Oil System Fluid Capacity | 8 gal (29 l) |
Operating Voltage | 24 volts |
Rear Diff/Final Drive Fluid Capacity | 10 gal (36 l) |
Std Operation Weight - Front Axle | 8,790 lbs (3,987 kg) |
Std Operation Weight - Rear Axle | 22,710 lbs (10,301 kg) |
Std Operation Weight - Total | 31,500 lbs (14,288 kg) |
Tandem Case Fluid Capacity (each) | 20 gal (75 l) |
Tire Size | 14.00-24 |
Transmission Fluid Capacity | 10 gal (38 l) |
Articulation Angle | 25 degrees |
Turning Radius | 22 ft (7 m) |
Max Speed - Forward | 26 mph (42 kph) |
Max Speed - Reverse | 26 mph (42 kph) |
Number of Gears - Forward | 8 |
Number of Gears - Reverse | 8 |
Transmission Type | Power Shift |