- Category: Motor Graders ➔
- Manufacturer: New Holland ➔
- Model: F140 ➔
Introducing the New Holland F140 Motor Grader, a rugged and efficient machine designed for grading and shaping road surfaces with precision. With a powerful engine, advanced hydraulic system, and a variety of operating specifications, this motor grader is built to handle a wide range of tasks with ease. From circle blade tip angles to transmission capabilities, the F140 offers superior performance and reliability for any grading job. Get ready to conquer any terrain with the New Holland F140 Motor Grader.
General Specifications
Circle
Blade Tip Angle - Front | 40 degrees
|
Blade Tip Angle - Rear | 5 degrees
|
Diameter | 69 in (176 cm)
|
Max Lift Above Ground | 18 in (44 cm)
|
Max Reach Outside Tires - Left | 62 in (158 cm)
|
Max Reach Outside Tires - Right | 69 in (174 cm)
|
Rotation | 360 degrees
|
Dimensions
Blade Base | 9 ft (3 m)
|
Height to Top of Isomount Cab | 11 ft (3 m)
|
Overall Length | 28 ft (9 m)
|
Rear Ground Clearance | 2 ft (1 m)
|
Tandem Axle Wheelbase | 5 ft (2 m)
|
Wheelbase | 21 ft (6 m)
|
Width Over Tires | 8 ft (3 m)
|
Engine
Aspiration | turbocharged
|
Displacement | 360 cu in (5,901 cu cm)
|
Engine Model | 6BTA5.9 Tier 1
|
Net Torque Gears 7-8 | 104 lbs ft (141 nm)
|
Power Measured @ | 2200 rpm
|
Front Axle
Ground Clearance | 2 ft (1 m)
|
Oscillation - Total | 19 degrees
|
Wheel Lean | 18 degrees
|
Hydraulic System
Pump Flow | 51 gpm (192 lpm)
|
Pump Type | Full Hydraulic Load Sensing
|
Relief Valve Pressure | 2596.2 psi
|
Moldboard
Blade Down Pressure | 19,039 lbs (8,636 kg)
|
Max Depth of Cut | 28 in (71 cm)
|
Moldboard Height | 25 in (62 cm)
|
Moldboard Thickness | 1 in (2 cm)
|
Moldboard Width | 12 ft (4 m)
|
Side Shift Left | 21 in (53 cm)
|
Side Shift Right | 27 in (69 cm)
|
Operating Specifications
Alternator Supplied Amperage | 70 amps
|
Circle Gearbox Fluid Capacity | 1 gal (3 l)
|
Cooling System Fluid Capacity | 11 gal (40 l)
|
Fuel Capacity | 90 gal (340 l)
|
Hydraulic System Fluid Capacity | 25 gal (95 l)
|
Max Operation Weight - Front Axle | 8,173 lbs (3,707 kg)
|
Max Operation Weight - Rear Axle | 21,667 lbs (9,828 kg)
|
Max Operation Weight - Total | 29,840 lbs (13,535 kg)
|
Oil System Fluid Capacity | 4 gal (14 l)
|
Operating Voltage | 24 volts
|
Tandem Case Fluid Capacity (each) | 8 gal (30 l)
|
Tire Size | 13.00 x 24 (12PR)
|
Transmission Fluid Capacity | 7 gal (25 l)
|
Steering System
Articulation Angle | 25 degrees
|
Turning Radius | 24 ft (7 m)
|
Transmission
Max Speed - Forward | 27 mph (43 kph)
|
Max Speed - Reverse | 18 mph (29 kph)
|
Number of Gears - Forward | 8
|
Number of Gears - Reverse | 4
|
Transmission Type | Direct Drive Power-Shift
|