- Category: Motor Graders ➔
- Manufacturer: New Holland ➔
- Model: G140 ➔
The New Holland G140 Motor Grader is a powerful and versatile machine designed for precision grading tasks. Equipped with a turbocharged engine producing 160 horsepower, this grader offers exceptional performance and efficiency. With a range of advanced features including hydraulic system relief valve pressure of 2600 psi and a moldboard blade down pressure of 14788 lbs, the G140 delivers optimal control and productivity. Its spacious Isomount cab provides a comfortable operating environment while the full power shift direct drive transmission ensures smooth operation. Ideal for tackling various grading applications, the G140 Motor Grader is a reliable and durable choice for any job site.
General Specifications
Blades
Maximum Shoulder Reach Outside of Tires - Left | 6 in (16 cm)
|
Maximum Shoulder Reach Outside of Tires - Right | 7 in (18 cm)
|
Moldboard Sideshift - Left | 21 in (53 cm)
|
Moldboard Sideshift - Right | 28 in (71 cm)
|
Circle
Blade Tip Angle - Front | 5 degrees
|
Blade Tip Angle - Rear | 42 degrees
|
Diameter | 69 in (176 cm)
|
Max Lift Above Ground | 18 in (45 cm)
|
Max Reach Outside Tires - Left | 78 in (198 cm)
|
Max Reach Outside Tires - Right | 86 in (217 cm)
|
Rotation | 360 degrees
|
Dimensions
Blade Base | 9 ft (3 m)
|
Front Ground Clearance | 1 ft (0 m)
|
Height to Top of Isomount Cab | 10 ft (3 m)
|
Overall Length | 28 ft (9 m)
|
Rear Ground Clearance | 2 ft (1 m)
|
Tandem Axle Wheelbase | 5 ft (2 m)
|
Wheelbase | 21 ft (6 m)
|
Width Over Tires | 8 ft (3 m)
|
Engine
Aspiration | Turbocharged
|
Base Power (1st Gear) - Net | 140 hp (104 kw)
|
Displacement | 409 cu in (6,701 cu cm)
|
Engine Model | QSB 6.7L
|
Max Power | 160 hp (119 kw)
|
Net Power Gears 7-8 | 160 hp (119 kw)
|
Net Torque Gears 7-8 | 550 lbs ft (746 nm)
|
Number of Cylinders | 6
|
Power Measured @ | 2200 rpm
|
Torque Measured @ | 1500 rpm
|
Front Axle
Ground Clearance | 2 ft (1 m)
|
Oscillation - Total | 19 degrees
|
Wheel Lean | 17.5 degrees
|
Hydraulic System
Pump Flow | 49 gpm (185 lpm)
|
Pump Type | Piston pump variable displacement
|
Relief Valve Pressure | 2600 psi
|
Moldboard
Blade Down Pressure | 14,788 lbs (6,708 kg)
|
Moldboard Height | 25 in (62 cm)
|
Moldboard Length | 12 ft (4 m)
|
Moldboard Thickness | 1 in (2 cm)
|
Moldboard Width | 12 ft (4 m)
|
Side Shift Left | 21 in (53 cm)
|
Side Shift Right | 28 in (71 cm)
|
Operating Specifications
Alternator Supplied Amperage | 80 amps
|
Circle Gearbox Fluid Capacity | 1 gal (3 l)
|
Cooling System Fluid Capacity | 11 gal (40 l)
|
Fuel Capacity | 90 gal (341 l)
|
Hydraulic System Fluid Capacity | 48 gal (180 l)
|
Operating Voltage | 24 volts
|
Operating Weight | 29,918 lbs (13,571 kg)
|
Std Operation Weight - Front Axle | 8,172 lbs (3,707 kg)
|
Std Operation Weight - Rear Axle | 21,746 lbs (9,864 kg)
|
Std Operation Weight - Total | 29,918 lbs (13,571 kg)
|
Tandem Case Fluid Capacity (each) | 8 gal (29 l)
|
Tire Size | 14.00X24 10 Ply G2
|
Transmission Fluid Capacity | 5 gal (18 l)
|
Steering System
Articulation Angle | 25 degrees
|
Turning Radius | 23,786 ft (7,250 m)
|
Transmission
Max Speed - Forward | 27 mph (43 kph)
|
Max Speed - Reverse | 18 mph (28 kph)
|
Number of Gears - Forward | 8
|
Number of Gears - Reverse | 4
|
Transmission Type | Full power shift direct drive
|