- Category: Motor Graders ➔
- Manufacturer: New Holland ➔
- Model: G170 ➔
The New Holland G170 Motor Grader is a powerful machine designed for precision grading applications. With a turbocharged engine producing up to 205 horsepower, this grader boasts impressive capabilities including a moldboard height of 24.5 inches, a circle rotation of 360 degrees, and a front axle oscillation of 19 degrees. Equipped with a full power shift direct drive transmission and hydraulic system with 49 gpm pump flow, the G170 ensures efficient and smooth operation for a variety of road construction and maintenance tasks.
General Specifications
Blades
Maximum Shoulder Reach Outside of Tires - Left | 6 in (16 cm)
|
Maximum Shoulder Reach Outside of Tires - Right | 7 in (18 cm)
|
Moldboard Sideshift - Left | 21 in (53 cm)
|
Moldboard Sideshift - Right | 28 in (71 cm)
|
Circle
Blade Tip Angle - Front | 42 degrees
|
Blade Tip Angle - Rear | 5 degrees
|
Diameter | 69 in (176 cm)
|
Max Lift Above Ground | 18 in (45 cm)
|
Max Reach Outside Tires - Left | 78 in (198 cm)
|
Max Reach Outside Tires - Right | 86 in (217 cm)
|
Rotation | 360 degrees
|
Dimensions
Blade Base | 9 ft (3 m)
|
Front Ground Clearance | 2 ft (1 m)
|
Height to Top of Isomount Cab | 10 ft (3 m)
|
Overall Length | 28 ft (9 m)
|
Rear Ground Clearance | 1 ft (0 m)
|
Tandem Axle Wheelbase | 5 ft (2 m)
|
Wheelbase | 21 ft (6 m)
|
Width Over Tires | 8 ft (3 m)
|
Engine
Aspiration | Turbocharged
|
Base Power (1st Gear) - Net | 180 hp (134 kw)
|
Displacement | 409 cu in (6,702 cu cm)
|
Engine Model | QSB 6.7L
|
Max Power | 205 hp (153 kw)
|
Net Power Gears 7-8 | 205 hp (153 kw)
|
Net Torque Gears 7-8 | 653 lbs ft (885 nm)
|
Number of Cylinders | 6
|
Power Measured @ | 2200 rpm
|
Torque Measured @ | 1500 rpm
|
Front Axle
Ground Clearance | 2 ft (1 m)
|
Oscillation - Total | 19 degrees
|
Wheel Lean | 17.5 degrees
|
Hydraulic System
Pump Flow | 49 gpm (185 lpm)
|
Pump Type | Piston pump variable displacement
|
Relief Valve Pressure | 2600 psi
|
Moldboard
Blade Down Pressure | 16,063 lbs (7,286 kg)
|
Moldboard Height | 25 in (62 cm)
|
Moldboard Length | 14 ft (4 m)
|
Moldboard Thickness | 1 in (2 cm)
|
Moldboard Width | 14 ft (4 m)
|
Side Shift Left | 21 in (53 cm)
|
Side Shift Right | 28 in (71 cm)
|
Operating Specifications
Alternator Supplied Amperage | 80 amps
|
Circle Gearbox Fluid Capacity | 1 gal (3 l)
|
Cooling System Fluid Capacity | 11 gal (40 l)
|
Fuel Capacity | 90 gal (341 l)
|
Hydraulic System Fluid Capacity | 48 gal (180 l)
|
Operating Voltage | 24 volts
|
Operating Weight | 31,786 lbs (14,418 kg)
|
Rear Diff/Final Drive Fluid Capacity | 8 gal (29 l)
|
Std Operation Weight - Front Axle | 9,370 lbs (4,250 kg)
|
Std Operation Weight - Rear Axle | 22,419 lbs (10,169 kg)
|
Std Operation Weight - Total | 32,077 lbs (14,550 kg)
|
Tandem Case Fluid Capacity (each) | 8 gal (29 l)
|
Tire Size | 14.00x24 10 Ply G2
|
Transmission Fluid Capacity | 5 gal (19 l)
|
Steering System
Articulation Angle | 25 degrees
|
Turning Radius | 24 ft (7 m)
|
Transmission
Max Speed - Forward | 27 mph (43 kph)
|
Max Speed - Reverse | 18 mph (28 kph)
|
Number of Gears - Forward | 8
|
Number of Gears - Reverse | 4
|
Transmission Type | Full power shift direct drive
|