Categories ↠ Motor Graders ↠ New Holland G200

New Holland G200 Motor Grader

Category: Motor Graders ➔
Manufacturer: New Holland ➔
Model: G200 ➔

The New Holland G200 motor grader is a powerful and versatile machine designed to meet the demands of grading and road maintenance tasks. With its turbocharged engine delivering 205 horsepower and a robust hydraulic system, this motor grader boasts impressive capabilities such as a maximum reach outside of tires, blade sideshift adjustments, and efficient circle rotation. Its ergonomic design, ample fuel capacity, and reliable transmission ensure efficient operation and high performance on the job site. Discover detailed specifications and features of the New Holland G200 motor grader below.

See all New Holland G200s for sale

General Specifications

Blades

Maximum Shoulder Reach Outside of Tires - Left	6 in (16 cm)
Maximum Shoulder Reach Outside of Tires - Right	7 in (18 cm)
Moldboard Sideshift - Left	21 in (53 cm)
Moldboard Sideshift - Right	28 in (71 cm)

Circle

Blade Tip Angle - Front	42 degrees
Blade Tip Angle - Rear	5 degrees
Diameter	69 in (176 cm)
Max Lift Above Ground	18 in (45 cm)
Max Reach Outside Tires - Left	78 in (198 cm)
Max Reach Outside Tires - Right	86 in (217 cm)
Rotation	360 degrees

Dimensions

Blade Base	9 ft (3 m)
Front Ground Clearance	2 ft (1 m)
Height to Top of Isomount Cab	10 ft (3 m)
Overall Length	28 ft (9 m)
Rear Ground Clearance	1 ft (0 m)
Tandem Axle Wheelbase	5 ft (2 m)
Wheelbase	21 ft (6 m)
Width Over Tires	9 ft (3 m)

Engine

Aspiration	Turbocharged
Base Power (1st Gear) - Net	205 hp (153 kw)
Displacement	409 cu in (6,702 cu cm)
Engine Model	QSB 6.7L
Max Power	205 hp (153 kw)
Net Power Gears 7-8	205 hp (153 kw)
Net Torque Gears 7-8	650 lbs ft (881 nm)
Number of Cylinders	6
Power Measured @	2200 rpm
Torque Measured @	1600 rpm

Front Axle

Ground Clearance	2 ft (1 m)
Oscillation - Total	19 degrees
Wheel Lean	17.5 degrees

Hydraulic System

Pump Flow	49 gpm (185 lpm)
Pump Type	Piston pump variable displacement
Relief Valve Pressure	2600 psi

Moldboard

Blade Down Pressure	19,391 lbs (8,796 kg)
Moldboard Height	25 in (62 cm)
Moldboard Length	14 ft (4 m)
Moldboard Thickness	1 in (2 cm)
Moldboard Width	14 ft (4 m)
Side Shift Left	21 in (53 cm)
Side Shift Right	28 in (71 cm)

Operating Specifications

Alternator Supplied Amperage	80 amps
Circle Gearbox Fluid Capacity	1 gal (3 l)
Cooling System Fluid Capacity	11 gal (40 l)
Fuel Capacity	90 gal (341 l)
Hydraulic System Fluid Capacity	48 gal (180 l)
Operating Voltage	24 volts
Operating Weight	37,739 lbs (17,118 kg)
Rear Diff/Final Drive Fluid Capacity	3 gal (12 l)
Std Operation Weight - Front Axle	11,250 lbs (5,103 kg)
Std Operation Weight - Rear Axle	26,488 lbs (12,015 kg)
Std Operation Weight - Total	37,738 lbs (17,118 kg)
Tandem Case Fluid Capacity (each)	6 gal (23 l)
Tire Size	14.00x24 10 Ply G2
Transmission Fluid Capacity	6 gal (22 l)

Steering System

Articulation Angle	25 degrees
Turning Radius	23,914 ft (7,289 m)

Transmission

Max Speed - Forward	27 mph (43 kph)
Max Speed - Reverse	19 mph (31 kph)
Number of Gears - Forward	8
Number of Gears - Reverse	4
Transmission Type	Full power shift direct drive

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon