Volvo G710 Motor Grader

Category: Motor Graders ➔
Manufacturer: Volvo ➔
Model: G710 ➔

General Specifications

Circle

Diameter	66 in (168 cm)
Rotation	360 degrees

Dimensions

Blade Base	9 ft (3 m)
Overall Length	28 ft (8 m)
Wheelbase	20 ft (6 m)
Width Over Tires	8 ft (2 m)

Engine

Aspiration	turbocharged
Displacement	360 cu in (5,901 cu cm)
Engine Model	6B5.9
Max Power	140 hp (104 kw)
Net Power Gears 7-8	140 hp (104 kw)
Net Torque Gears 7-8	440 lbs ft (597 nm)
Number of Cylinders	6
Power Measured @	2200 rpm
Torque Measured @	1600 rpm

Front Axle

Ground Clearance	2 ft (1 m)
Oscillation - Total	16 degrees
Wheel Lean	18 degrees

Hydraulic System

Pump Flow	51 gpm (191 lpm)
Pump Type	load sensing hydraulic
Relief Valve Pressure	2500 psi

Moldboard

Blade Down Pressure	16,494 lbs (7,482 kg)
Blade Pull at Max Weight	19,109 lbs (8,668 kg)
Max Depth of Cut	33 in (83 cm)
Moldboard Height	25 in (63 cm)
Moldboard Thickness	1 in (2 cm)
Moldboard Width	12 ft (4 m)
Side Shift Left	31 in (77 cm)
Side Shift Right	31 in (77 cm)

Operating Specifications

Std Operation Weight - Front Axle	9,401 lbs (4,264 kg)
Std Operation Weight - Rear Axle	21,231 lbs (9,630 kg)
Std Operation Weight - Total	30,631 lbs (13,894 kg)

Steering System

Articulation Angle	22 degrees
Turning Radius	26 ft (8 m)

Transmission

Max Speed - Forward	25 mph (40 kph)
Max Speed - Reverse	18 mph (29 kph)
Number of Gears - Forward	8
Number of Gears - Reverse	4
Transmission Type	Volvo 8400

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon