Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Blade Tip Angle - Front | 45 degrees |
Blade Tip Angle - Rear | 6.5 degrees |
Max Reach Outside Tires - Left | 120 in (305 cm) |
Max Reach Outside Tires - Right | 120 in (304 cm) |
Rotation | 360 degrees |
Shift Left | 31 in (77 cm) |
Shift Right | 30 in (75 cm) |
Blade Base | 9 ft (3 m) |
Height to Top of Isomount Cab | 10 ft (3 m) |
Overall Length | 28 ft (9 m) |
Wheelbase | 20 ft (6 m) |
Width Over Tires | 8 ft (3 m) |
Aspiration | turbocharged |
Displacement | 505 cu in (8,271 cu cm) |
Engine Model | 6C8.3 |
Max Power | 160 hp (119 kw) |
Net Power Gears 7-8 | 160 hp (119 kw) |
Net Torque Gears 7-8 | 560 lbs ft (759 nm) |
Number of Cylinders | 6 |
Ground Clearance | 2 ft (1 m) |
Oscillation - Total | 16 degrees |
Wheel Lean | 18 degrees |
Pump Flow | 51 gpm (191 lpm) |
Pump Type | load sensing hydraulic |
Relief Valve Pressure | 2500 psi |
Blade Down Pressure | 16,717 lbs (7,583 kg) |
Blade Pull at Max Weight | 7,853 lbs (3,562 kg) |
Max Depth of Cut | 18 in (44 cm) |
Moldboard Height | 25 in (63 cm) |
Moldboard Thickness | 1 in (2 cm) |
Moldboard Width | 12 ft (4 m) |
Side Shift Left | 27 in (67 cm) |
Side Shift Right | 27 in (67 cm) |
Cooling System Fluid Capacity | 13 gal (47 l) |
Fuel Capacity | 102 gal (388 l) |
Hydraulic System Fluid Capacity | 24 gal (90 l) |
Operating Voltage | 24 volts |
Rear Diff/Final Drive Fluid Capacity | 6 gal (23 l) |
Std Operation Weight - Front Axle | 9,614 lbs (4,361 kg) |
Std Operation Weight - Rear Axle | 22,961 lbs (10,415 kg) |
Std Operation Weight - Total | 32,571 lbs (14,774 kg) |
Tandem Case Fluid Capacity (each) | 27 gal (100 l) |
Transmission Fluid Capacity | 10 gal (38 l) |
Articulation Angle | 72 degrees |
Turning Radius | 26 ft (8 m) |
Max Speed - Forward | 28 mph (46 kph) |
Max Speed - Reverse | 20 mph (33 kph) |
Number of Gears - Forward | 8 |
Number of Gears - Reverse | 4 |
Transmission Type | Volvo 8400 |