Categories ↠ Motor Graders ↠ Volvo G740 VHP

Volvo G740 VHP Motor Grader

Category: Motor Graders ➔
Manufacturer: Volvo ➔
Model: G740 VHP ➔

The Volvo G740 VHP Motor Grader offers powerful performance and precision for a variety of grading tasks. With a Circle Blade Tip Angle of 44 degrees in the front and 2.5 degrees in the rear, a Circle Diameter of 66.3 inches, and a Circle Max Reach of up to 79.5 inches outside the tires, this machine provides superior control and stability. Equipped with a Turbocharged engine boasting 235 horsepower and a load sensing hydraulic system pump, the G740 VHP ensures efficient operation and maximum productivity on the job site.

See all Volvo G740 VHPs for sale

General Specifications

Circle

Blade Tip Angle - Front	44 degrees
Blade Tip Angle - Rear	2.5 degrees
Diameter	66 in (168 cm)
Max Lift Above Ground	17 in (44 cm)
Max Reach Outside Tires - Left	80 in (202 cm)
Max Reach Outside Tires - Right	79 in (201 cm)
Rotation	360 degrees
Shift Left	31 in (77 cm)
Shift Right	30 in (75 cm)

Dimensions

Blade Base	9 ft (3 m)
Height to Top of Isomount Cab	10 ft (3 m)
Overall Length	28 ft (9 m)
Wheelbase	21 ft (6 m)
Width Over Tires	8 ft (3 m)

Engine

Aspiration	Turbocharged
Displacement	659 cu in (10,801 cu cm)
Engine Model	M11
Max Power	235 hp (175 kw)
Net Power Gears 7-8	235 hp (175 kw)
Net Torque Gears 7-8	845 lbs ft (1,146 nm)
Power Measured @	2100 rpm
Torque Measured @	1300 rpm

Front Axle

Ground Clearance	2 ft (1 m)
Oscillation - Total	16 degrees
Wheel Lean	18 degrees

Hydraulic System

Pump Flow	48 gpm (183 lpm)
Pump Type	load sensing hydraulic
Relief Valve Pressure	2500 psi

Moldboard

Blade Down Pressure	18,904 lbs (8,575 kg)
Blade Pull at Max Weight	22,424 lbs (10,171 kg)
Max Depth of Cut	32 in (80 cm)
Moldboard Height	29 in (74 cm)
Moldboard Thickness	1 in (3 cm)
Moldboard Width	15 ft (5 m)
Side Shift Left	27 in (67 cm)
Side Shift Right	27 in (67 cm)

Operating Specifications

Alternator Supplied Amperage	75 amps
Cooling System Fluid Capacity	13 gal (50 l)
Fuel Capacity	100 gal (379 l)
Hydraulic System Fluid Capacity	24 gal (90 l)
Operating Voltage	24 volts
Rear Diff/Final Drive Fluid Capacity	6 gal (23 l)
Std Operation Weight - Front Axle	10,695 lbs (4,851 kg)
Std Operation Weight - Rear Axle	24,917 lbs (11,302 kg)
Std Operation Weight - Total	35,611 lbs (16,153 kg)
Tandem Case Fluid Capacity (each)	27 gal (100 l)
Tire Size	14.00 x 24 G-2
Transmission Fluid Capacity	10 gal (38 l)

Steering System

Articulation Angle

22 degrees

Transmission

Max Speed - Forward	27 mph (44 kph)
Max Speed - Reverse	20 mph (31 kph)
Number of Gears - Forward	8
Number of Gears - Reverse	4
Transmission Type	Powershift

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon