- Category: Motor Graders ➔
- Manufacturer: Volvo ➔
- Model: G930 ➔
The Volvo G930 Motor Grader is a powerful and versatile machine designed for grading tasks on construction sites and road maintenance projects. With a turbocharged, aftercooled engine producing 204 horsepower, this motor grader offers exceptional performance and precision. Its hydraulic system boasts a pump flow of 55 gpm and a relief valve pressure of 3000 psi, ensuring efficient operation. Equipped with a 12-foot wide moldboard and a maximum operating weight of 42,500 pounds, the Volvo G930 is a reliable and capable tool for any grading application.
General Specifications
Circle
Blade Tip Angle - Front | 47 degrees
|
Blade Tip Angle - Rear | 5 degrees
|
Diameter | 64 in (163 cm)
|
Max Lift Above Ground | 19 in (49 cm)
|
Max Reach Outside Tires - Left | 80 in (203 cm)
|
Max Reach Outside Tires - Right | 79 in (201 cm)
|
Rotation | 360 degrees
|
Shift Left | 31 in (77 cm)
|
Shift Right | 30 in (75 cm)
|
Dimensions
Blade Base | 9 ft (3 m)
|
Front Ground Clearance | 2 ft (1 m)
|
Height to Top of Isomount Cab | 11 ft (3 m)
|
Overall Length | 29 ft (9 m)
|
Wheelbase | 21 ft (6 m)
|
Width Over Tires | 8 ft (3 m)
|
Engine
Aspiration | Turbocharged Aftercooled
|
Displacement | 436 cu in (7,145 cu cm)
|
Engine Model | D7EGCE3
|
Max Power | 204 hp (152 kw)
|
Net Power Gears 7-8 | 204 hp (152 kw)
|
Net Torque Gears 7-8 | 684 lbs ft (927 nm)
|
Number of Cylinders | 6
|
Power Measured @ | 1800 rpm
|
Torque Measured @ | 1550 rpm
|
Front Axle
Ground Clearance | 2 ft (1 m)
|
Oscillation - Total | 16 degrees
|
Wheel Lean | 18 degrees
|
Hydraulic System
Pump Flow | 55 gpm (208 lpm)
|
Pump Type | Axial piston pump
|
Relief Valve Pressure | 3000 psi
|
Moldboard
Blade Down Pressure | 18,021 lbs (8,174 kg)
|
Blade Pull at Max Weight | 28,260 lbs (12,819 kg)
|
Max Depth of Cut | 31 in (79 cm)
|
Moldboard Height | 25 in (63 cm)
|
Moldboard Thickness | 1 in (2 cm)
|
Moldboard Width | 12 ft (4 m)
|
Side Shift Left | 27 in (67 cm)
|
Side Shift Right | 27 in (67 cm)
|
Operating Specifications
Alternator Supplied Amperage | 80 amps
|
Cooling System Fluid Capacity | 8 gal (31 l)
|
Fuel Capacity | 92 gal (348 l)
|
Hydraulic System Fluid Capacity | 24 gal (91 l)
|
Max Operation Weight - Front Axle | 16,700 lbs (7,575 kg)
|
Max Operation Weight - Rear Axle | 31,400 lbs (14,243 kg)
|
Max Operation Weight - Total | 42,500 lbs (19,278 kg)
|
Oil System Fluid Capacity | 6 gal (22 l)
|
Operating Voltage | 24 volts
|
Std Operation Weight - Front Axle | 10,360 lbs (4,699 kg)
|
Std Operation Weight - Rear Axle | 24,470 lbs (11,099 kg)
|
Std Operation Weight - Total | 34,830 lbs (15,799 kg)
|
Tandem Case Fluid Capacity (each) | 26 gal (100 l)
|
Tire Size | 14:00 x 24 G-2
|
Transmission Fluid Capacity | 16 gal (61 l)
|
Steering System
Articulation Angle | 50 degrees
|
Turning Radius | 24 ft (7 m)
|
Transmission
Max Speed - Forward | 28 mph (46 kph)
|
Max Speed - Reverse | 20 mph (32 kph)
|
Number of Gears - Forward | 8
|
Number of Gears - Reverse | 4
|
Transmission Type | HTE 840 Fully sequential direct drive volvo powershift transmission
|