- Category: Motor Graders ➔
- Manufacturer: Volvo ➔
- Model: G940 ➔
The Volvo G940 Motor Grader is a powerful and versatile piece of equipment designed for precision grading and maintenance of roads, highways, and construction sites. With a turbocharged, aftercooled engine delivering 225 horsepower and 754 lb-ft of torque, this motor grader can handle a variety of tasks with ease. Featuring a 12-foot moldboard, 360-degree circle rotation, and a hydraulic system with a pump flow of 55 gpm, the Volvo G940 provides exceptional performance and efficiency for any grading project.
Circle
Blade Tip Angle - Front | 45 degrees |
Blade Tip Angle - Rear | 6 degrees |
Diameter | 64 in (163 cm) |
Max Reach Outside Tires - Left | 80 in (203 cm) |
Max Reach Outside Tires - Right | 79 in (201 cm) |
Rotation | 360 degrees |
Shift Left | 31 in (77 cm) |
Shift Right | 30 in (75 cm) |
Dimensions
Blade Base | 9 ft (3 m) |
Front Ground Clearance | 2 ft (1 m) |
Height to Top of Isomount Cab | 11 ft (3 m) |
Overall Length | 30 ft (9 m) |
Wheelbase | 21 ft (6 m) |
Width Over Tires | 8 ft (3 m) |
Engine
Aspiration | Turbocharged, Aftercooled |
Displacement | 436 cu in (7,145 cu cm) |
Engine Model | D7E |
Max Power | 225 hp (168 kw) |
Net Power Gears 7-8 | 225 hp (168 kw) |
Net Torque Gears 7-8 | 754 lbs ft (1,022 nm) |
Number of Cylinders | 6 |
Power Measured @ | 1800 rpm |
Torque Measured @ | 1550 rpm |
Front Axle
Ground Clearance | 2 ft (1 m) |
Oscillation - Total | 16 degrees |
Wheel Lean | 18 degrees |
Hydraulic System
Pump Flow | 55 gpm (208 lpm) |
Pump Type | Axial piston pump |
Relief Valve Pressure | 3000 psi |
Moldboard
Blade Down Pressure | 17,895 lbs (8,117 kg) |
Blade Pull at Max Weight | 28,260 lbs (12,819 kg) |
Max Depth of Cut | 31 in (79 cm) |
Moldboard Height | 25 in (63 cm) |
Moldboard Thickness | 1 in (2 cm) |
Moldboard Width | 12 ft (4 m) |
Side Shift Left | 27 in (67 cm) |
Side Shift Right | 27 in (67 cm) |
Operating Specifications
Alternator Supplied Amperage | 80 amps |
Cooling System Fluid Capacity | 8 gal (31 l) |
Fuel Capacity | 107 gal (405 l) |
Hydraulic System Fluid Capacity | 24 gal (91 l) |
Max Operation Weight - Front Axle | 16,700 lbs (7,575 kg) |
Max Operation Weight - Rear Axle | 31,400 lbs (14,243 kg) |
Max Operation Weight - Total | 47,000 lbs (21,319 kg) |
Oil System Fluid Capacity | 6 gal (22 l) |
Operating Voltage | 24 volts |
Std Operation Weight - Front Axle | 10,360 lbs (4,699 kg) |
Std Operation Weight - Rear Axle | 25,790 lbs (11,698 kg) |
Std Operation Weight - Total | 36,150 lbs (16,397 kg) |
Tandem Case Fluid Capacity (each) | 26 gal (100 l) |
Tire Size | 14:00 x 24, G-2 |
Transmission Fluid Capacity | 16 gal (61 l) |
Steering System
Turning Radius | 24 ft (7 m) |
Transmission
Max Speed - Forward | 28 mph (46 kph) |
Max Speed - Reverse | 20 mph (32 kph) |
Number of Gears - Forward | 8 |
Number of Gears - Reverse | 4 |
Transmission Type | HTE840, Fully sequential, direct drive, Volvo powershift transmission |