Categories ↠ Off-Highway Trucks ↠ Caterpillar 725C2

Caterpillar 725C2 Off-Highway Truck

Category: Off-Highway Trucks ➔
Manufacturer: Caterpillar ➔
Model: 725C2 ➔

The Caterpillar 725C2 Off-Highway Truck is a powerful and reliable machine designed for heavy-duty hauling in challenging environments. With a body capacity of up to 20.4 cubic yards, a high-strength wear-resistant steel body plate, and a Tier 4 Final Cat C9.3 ACERT engine delivering 320 horsepower, this truck is built to handle tough jobs with ease. Its quick body hoist raise and lower times, along with its impressive operating weights and service refill capacities, make it a versatile and efficient choice for various applications. Additionally, the truck's transmission speeds, turning dimensions, and sound levels ensure a smooth and productive operation on the job site.

See all Caterpillar 725C2s for sale

General Specifications

Articulated/Rigid	A Starting 2019 Model Year
Drive Configuration	6WD Starting 2019 Model Year
Engine Type	Cat C9.3 ACERT Starting 2019 Model Year
Mfg. Model	725C2 Starting 2019 Model Year
Operating Weight Pounds (Kgs)	50,795 (23,040) Starting 2019 Model Year
Planetary Powershift Transmission	Powershift w/ lockup torque converter Starting 2019 Model Year
Rated Payload Tons (Metric Tons)	26.5 (24) Starting 2019 Model Year

Body Capacities

Heaped (SAE 2:1)	20 cu yd (15 cu m)
Struck	14 cu yd (11 cu m)
Tailgate Heaped SAE 2:1	20 cu yd (16 cu m)
Tailgate Struck	15 cu yd (11 cu m)

Body Hoist

Lower Time	8 seconds
Raise Time	10 seconds

Body Plate

Body Plate Type

High strength Brinell HB450 wear resistant steel

Engine

Engine Model - U.S. EPA Tier 4 Final/EU Stage IV	Cat C9.3 ACERT
Gross Power - SAE J1995	320 hp (239 kw)
Net Power - ISO 14396	316 hp (236 kw)
Net Power - SAE J1349	314 hp (234 kw)
No Engine De-rating Required Below	7,500 ft (2,286 m)
Peak Engine Torque Gross (SAE J1995)	1,275 lbs ft (1,729 nm)
Peak Engine Torque Net (ISO 14396)	1,262 lbs ft (1,711 nm)
Peak Engine Torque Net (SAE J1349)	1,262 lbs ft (1,711 nm)
Peak Engine Torque Speed	1200 rpm

Operating Weights

Center Axle - Empty	9,755 lbs (4,425 kg)
Center Axle - Loaded	33,455 lbs (15,175 kg)
Center Axle - Rated Load	23,700 lbs (10,750 kg)
Front Axle - Empty	31,835 lbs (14,440 kg)
Front Axle - Loaded	37,374 lbs (16,953 kg)
Front Axle - Rated Load	5,512 lbs (2,500 kg)
Rear Axle - Empty	9,205 lbs (4,175 kg)
Rear Axle - Loaded	32,905 lbs (14,925 kg)
Rear Axle - Rated Load	23,700 lbs (10,750 kg)
Total - Empty	50,795 lbs (23,040 kg)
Total - Loaded	103,707 lbs (47,041 kg)
Total - Rated Load	52,912 lbs (24,001 kg)

Service Refill Capacities

Cooling System	22 gal (83 l)
DEF Tank	5 gal (20 l)
DEF Tank (ISO 2224-1)	5 gal (20 l)
Engine Crankcase	10 gal (38 l)
Final Drives/Differential	33 gal (125 l)
Fuel Tank	109 gal (412 l)
Hydraulic System	29 gal (110 l)
Output Transfer Gear Box	6 gal (24 l)
Transmission	12 gal (47 l)

Sound Levels

Interior Cab

76 dB(A)

Steering System

Lock to Lock

4.75 seconds @ 60 rpm

Transmission

Forward - 1	5 mph (8 kph)
Forward - 2	9 mph (14 kph)
Forward - 3	14 mph (23 kph)
Forward - 4	21 mph (34 kph)
Forward - 5	29 mph (47 kph)
Forward - 6	36 mph (58 kph)
Reverse - 1	6 mph (10 kph)

Turning Circle

Turning Dimensions - Aisle Width	210 in (533 cm)
Turning Dimensions - Clearance Radius	318 in (808 cm)
Turning Dimensions - Inside Radius	153 in (389 cm)
Turning Dimensions - SAE Turning Radius	294 in (747 cm)
Turning Dimensions - Steer Angle - Left/Right	45 degrees

Wheel Base Length

Long Wheel Base	215 in (547 cm)
Standard Wheel Base	157 in (398 cm)

Caterpillar 725C2s currently for sale

A Caterpillar 725C2 From Ring Power Corp for $375,000.00 USD

A 2019 Caterpillar 725C2 From Southeastern Equipment Corporation (North Carolina) for $309,500.00 USD

A Caterpillar 725C2 From Altorfer Cat for $297,000.00 USD

A Caterpillar 725C2 From Altorfer Holdings for $247,500.00 USD

A Caterpillar 725C2 From Gregory Poole CAT for $225,000.00 USD

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon