List Your Equipment For Free  /  Seller Login


Caterpillar 772 Off-Highway Truck

Introducing the Caterpillar 772 Off-Highway Truck, a powerhouse of a vehicle designed to tackle the toughest challenges in mining and construction environments. With a gross weight of 112,000 pounds and a heaped load capacity of 41 cubic yards, this rigid truck is equipped with a Cat C18 ACERT engine that delivers a whopping 598 horsepower. Boasting impressive dimensions and operating specifications, including a top speed of 49.5 mph and a maximum payload capacity of 100,000 pounds, the Cat 772 is a reliable and efficient workhorse for heavy-duty operations. Explore the comprehensive technical specifications of this robust machine below.


See all Caterpillar 772s for sale

General Specifications

Approximate Weights - Dual Slope

Gross Weight - Empty112,000 lbs (50,802 kg)

Approximate Weights - Flat Floor

Chassis35 lbs (16 kg)

Articulating/Rigid

Articulating/Rigid Rigid

Body Hoists

Body Lower Time - Float12.5 seconds
Body Power Down - High Idle12.5 seconds
Body Raise Time - High Idle9.5 seconds
Pump Flow - High Idle136 gpm (515 lpm)
Relief Valve Setting - Raise2500 psi

Brakes

Brake Surface - Rear7,794 cu in (127,721 cu cm)
Standards2.74:1

Capacity - Flat Floor - 100% Fill Factor

Heaped 2:1 (SAE)41 cu yd (31 cu m)

Dimensions

Centerline Front Tire Width10 ft (3 m)
Dump Ground Clearance2 ft (1 m)
Dump Height28 ft (8 m)
Front Canopy Height14 ft (4 m)
Ground Clearance2 ft (1 m)
Inside Body Depth - Maximum6 ft (2 m)
Inside Body Length18 ft (6 m)
Loading Height - Empty12 ft (4 m)
Operating Width16 ft (5 m)
Overall Canopy Width500 ft (152 m)
Overall Height14 ft (4 m)
Overall Height - Body Raised28 ft (8 m)
Overall Length29 ft (9 m)
Overall Width16 ft (5 m)
Wheel Base13 ft (4 m)
Wheelbase13 ft (4 m)

DRIVE SYSTEM

Drive Config 4x2

Dump

Dump Angle1800
Load Capacity - heaped41 cu yd (31 cu m)
Load Capacity - Struck31 cu yd (23 cu m)
Lower Time14.7 seconds
Raise Time8.1 seconds
Rated Payload100,000 lbs (45,359 kg)

Engine

AspirationTurbocharged
Bore6 in (14 cm)
Displacement1,105 cu in (18,108 cu cm)
Engine ModelCat C18 ACERT
Gross Power598 hp (446 kw)
Gross Power - SAE J1995598 hp (446 kw)
MakeCat
Max Torque1,988 lbs ft (2,695 nm)
Net Power535 hp (399 kw)
Net Power - 80/1269/EEC535 hp (399 kw)
Net Power - ISO 9249535 hp (399 kw)
Net Power - SAE J1349535 hp (399 kw)
Number of Cylinders6
Peak Torque1,988 lbs ft (2,695 nm)
Power Measured @1800 rpm
Stroke7 in (18 cm)
Torque Measured @Turbocharged rpm
Torque Rise12.5

Final Drives

Planetary Ratio4.80:1
Total Reduction Ratio13.15:1

Operating Specifications

Alternator Supplied AmperageGear
Body Capacity - SAE 2:141 cu yd (31 cu m)
Brake/Hoist System Fluid Capacity73 gal (276 l)
Cooling System Fluid Capacity30 gal (114 l)
Diff and Final Drive Fluid Capacity42 gal (159 l)
Engine Oil Capacity14 gal (53 l)
Fuel Capacity140 gal (530 l)
Maximum Capacity100,000 lbs (45,359 kg)
Nominal Payload Capacity22 lbs (10 kg)
Nominal Payload Class (100%)102,000 lbs (46,266 kg)
Not to Exceed Payload (120%)*122,000 lbs (55,338 kg)
Steering System Fluid Capacity15 gal (57 l)
Tire Size21.00R33(E4)
Top Speed - Loaded50 mph (80 kph)

Service Refill Capacities

Brake / Hoist / Fan Hydraulic Tank35 gal (132 l)
Brake/Hoist Hydraulic Tank100,000 gal (378,500 l)
Cooling System30 gal (114 l)
Crankcase16 gal (61 l)
Fuel Tank140 gal (530 l)
Steering System - Including Tank15 gal (57 l)
Steering Tank9 gal (34 l)
Torque Converter - Transmission Sump55,171 gal (208,822 l)

Steering System

Steer Angle36 degrees
Steering StandardsISO 5010:1992
Turning Circle - Clearance DiameterISO 3450: 1996 ft

Suspension

Effective Cylinder Stroke - Rear6 in (15 cm)

Tires

Standard Tire21.00R33 (E4)
Standard Tires216

Transmission

Forward - 18 mph (13 kph)
Forward - 211 mph (18 kph)
Forward - 315 mph (24 kph)
Forward - 420 mph (32 kph)
Forward - 527 mph (44 kph)
Forward - 637 mph (59 kph)
Forward - 750 mph (80 kph)
Max Speed50 mph (80 kph)
Number of Gears - Forward7
Number of Gears - Reverse1
Reverse11 mph (17 kph)

Weights

Body Weight22,984 lbs (10,425 kg)
Chassis Weight55,171 lbs (25,025 kg)
Empty Weight78,155 lbs (35,451 kg)
Front Axle - Empty48%
Front Axle - Loaded34%
Loaded Weight181,000 lbs (82,100 kg)
Operating Weight - LoadedISO 5010:1992 lbs
Rear Axle - Empty52%
Rear Axle - Loaded66%
Weight Distribution Front - empty48%
Weight Distribution Front - loaded34%
Weight Distribution Rear - empty52%
Weight Distribution Rear - loaded66%

  • Caterpillar 772s currently for sale
  • A Caterpillar 772 From Finning CAT for $439,000.00 USD
  • A Caterpillar 772 From MacAllister Machinery Co., Inc. for $339,500.00 USD





  • 39.95234 \\ -75.16379 \\ Fort Washington \\ PA