Categories ↠ Skid Steer Loaders ↠ Case 445

Case 445 Skid Steer Loader

Category: Skid Steer Loaders ➔
Manufacturer: Case ➔
Model: 445 ➔

General Specifications

Dimensions

Clearance at Max Lift and Dump	8 ft (2 m)
Ground Clearance	9 in (23 cm)
Height - Top of Cab	7 ft (2 m)
Length w/o Bucket	9 ft (3 m)
Length with Bucket	11 ft (3 m)
Reach at Max Lift and Dump	32 in (81 cm)
Turning Radius from Center - inc bucket	83 in (210 cm)
Turning Radius from Center - machine rear	86 in (218 cm)
Wheelbase	4 ft (1 m)
Width Over Tires	5 ft (2 m)

Engine

Aspiration	naturally aspirated
Displacement	274 cu in (4,490 cu cm)
Engine Model	Family III 445/M2 Tier II certified
Gross Power	74 hp (55 kw)
Number of Cylinders	4
Power Measured @	2300 rpm

Hydraulic System

Pump Flow Capacity	21 gpm (79 lpm)
Pump Type	Gear
Relief Valve Pressure	3050 psi

Loader

Bucket Capacity	1 cu yd (1 cu m)
Operating Load Rating	2,500 lbs (1,134 kg)
Tipping Angle	5000 degrees

Operating Specifications

Alternator Supplied Amperage	95 amps
Chain Box Fluid Capacity - each side	2 gal (8 l)
Cooling System Fluid Capacity	5 gal (17 l)
Engine Oil Fluid Capacity	3 gal (12 l)
Fuel Capacity	17 gal (65 l)
Hydraulic System Fluid Capacity	11 gal (42 l)
Max Speed	12 mph (19 kph)
Operating Voltage	12 volts
Operational Weight	7,677 lbs (3,482 kg)
Tire Size	12.00 x 16.5

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon