Categories ↠ Skid Steer Loaders ↠ Caterpillar 216B III

Caterpillar 216B III Skid Steer Loader

Category: Skid Steer Loaders ➔
Manufacturer: Caterpillar ➔
Model: 216B III ➔

The Caterpillar 216B III Skid Steer Loader offers a powerful and efficient performance for a variety of construction and agricultural tasks. With a compact design and impressive dimensions, this machine boasts a strong engine, reliable hydraulic system, and durable construction. From its impressive operating capacities to its service refill capacities, the Caterpillar 216B III is a versatile and reliable choice for any job site.

See all Caterpillar 216B IIIs for sale

General Specifications

Cab

FOPS	SAE J/ISO 3449 APR98 Level I ISO 3449:1992 Level I
FOPS Level II	SAE J/ISO 3449 APR98 Level II ISO 3449:1992 Level II (optional)
ROPS	SAE J1040 MAY94 ISO 3471:1994

Dimensions

Bucket Pin Height - Carry Position	8 in (20 cm)
Bucket Pin Height - Maximum Lift	9 ft (3 m)
Bumper Overhang - Behind Rear Axle	38 in (97 cm)
Clearance at Max Lift and Dump	7 ft (2 m)
Clearance at Maximum Lift and Dump	85 in (217 cm)
Departure Angle	26 degrees
Ground Clearance	8 in (20 cm)
Length - With Bucket on Ground	127 in (323 cm)
Length - Without Bucket	99 in (251 cm)
Length w/o Bucket	8 ft (3 m)
Length with Bucket	11 ft (3 m)
Maimum Reach with Arms Parallel to Ground	51 in (130 cm)
Maximum Dump Angle	40 degrees
Maximum Overall Height	146 in (371 cm)
Rack Back Angle - Maximum Height	81 degrees
Reach - Maximum Lift/Dump	20 in (51 cm)
Reach at Max Lift and Dump	20 in (51 cm)
Turn Radius from Center - Bucket	77 in (196 cm)
Turn Radius from Center - Coupler	47 in (119 cm)
Turn Radius from Center - Machine Rear	59 in (150 cm)
Turning Radius from Center - inc bucket	77 in (195 cm)
Turning Radius from Center - machine rear	59 in (150 cm)
Vehicle Width over Tires	60 in (152 cm)
Wheel Base	3 ft (1 m)
Wheelbase	3 ft (1 m)
Width Over Tires	5 ft (2 m)

Engine

Bore	3 in (8 cm)
Displacement	134 cu in (2,196 cu cm)
Engine Make	Caterpillar
Engine Model	Cat C2.2
Gross Power - SAE J1995	51 hp (38 kw)
Net Flywheel Power	47 hp (35 kw)
Stroke	4 in (10 cm)

Hydraulic System

Pump Flow Capacity	16 gpm (61 lpm)
Relief Valve Pressure	3335 psi

Loader

Breakout Force	4083 psi
Operating Load Rating	1,400 lbs (635 kg)
Operating Width	60 in (152 cm)
Tipping Angle	2800 degrees

Operating Specifications

Alternator Supplied Amperage	65 amps
Breakout Force - Tilt Cylinder	4,083 lbs (1,852 kg)
Chain Box Fluid Capacity - each side	2 gal (6 l)
Cooling System Fluid Capacity	3 gal (10 l)
Engine Oil Fluid Capacity	3 gal (10 l)
Fuel Capacity	15 gal (58 l)
Hydraulic System Fluid Capacity	15 gal (55 l)
Operating Speed	8 mph (13 kph)
Operating Voltage	12 volts
Operational Weight	5,690 lbs (2,581 kg)
Rated Operating Capacity	1,400 lbs (635 kg)
Rated Operating Capacity with Optional Counterweight	1,500 lbs (680 kg)
Tipping Load	2,800 lbs (1,270 kg)

Service Refill Capacities

Chain Box - Each Side	2 gal (6 l)
Cooling System	3 gal (10 l)
Engine Crankcase	3 gal (10 l)
Fuel Tank	15 gal (58 l)
Hydraulic System	15 gal (55 l)
Hydraulic Tank	9 gal (35 l)

Weights

Operating Weight

5,690 lbs (2,581 kg)

Caterpillar 216B IIIs currently for sale

A 2023 Caterpillar 216B III From Ritchie Bros. Auctioneers for Auction Pricing

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon