Categories ↠ Skid Steer Loaders ↠ Caterpillar 216B

Caterpillar 216B Skid Steer Loader

Category: Skid Steer Loaders ➔
Manufacturer: Caterpillar ➔
Model: 216B ➔

The Caterpillar 216B Skid Steer Loader is a versatile and powerful machine designed for a variety of construction and landscaping tasks. With a compact design and impressive lifting capabilities, this loader offers excellent maneuverability and efficiency on the job site. Equipped with a Caterpillar engine, powerful hydraulic system, and a durable structure, the 216B is a reliable and productive choice for any project.

See all Caterpillar 216Bs for sale

General Specifications

Cab

FOPS	SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I
FOPS Level II	SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional)
ROPS	SAE J1040 MAY94 and ISO3471:1994

Dimensions

Bucket Pin Height - Carry Position	9 in (24 cm)
Bucket Pin Height - Maximum Lift	9 ft (3 m)
Bumper Overhang - Rear Axle	38 in (97 cm)
Clearance at Max Lift and Dump	7 ft (2 m)
Clearance at Maximum Lift and Dump	85 in (216 cm)
Ground Clearance	8 in (20 cm)
Length - With Bucket on Ground	127 in (323 cm)
Length - Without Bucket	99 in (251 cm)
Length w/o Bucket	8 ft (3 m)
Length with Bucket	11 ft (3 m)
Maximum Overall Height	146 in (371 cm)
Maximum Reach - With Arms Parallel	50 in (128 cm)
Reach - Maximum Lift/Dump	20 in (51 cm)
Reach at Max Lift and Dump	20 in (51 cm)
Turn Radius from Center - Bucket	76 in (194 cm)
Turn Radius from Center - Coupler	47 in (120 cm)
Turn Radius from Center - Rear	59 in (149 cm)
Turning Radius from Center - inc bucket	76 in (194 cm)
Turning Radius from Center - machine rear	59 in (149 cm)
Vehicle Width over Tires	60 in (152 cm)
Wheel Base	3 ft (1 m)
Wheelbase	3 ft (1 m)
Width Over Tires	5 ft (2 m)

Engine

Bore	3 in (8 cm)
Engine Make	Caterpillar
Engine Model	Cat 3024C
Engine Power - ISO 14396	51 hp (38 kw)
Gross Power - SAE J1995	52 hp (39 kw)
Net Flywheel Power	49 hp (37 kw)
Net Power - EEC 80/1269	50 hp (37 kw)
Net Power - ISO 9249 EEC	50 hp (37 kw)
Net Power - SAE 1349	49 hp (37 kw)
Stroke	4 in (10 cm)

Hydraulic System

Hydraulic Flow	Standard flow
Hydraulic Power	28 hp (21 kw)
Loader Hydraulic Flow	16 gpm (59 lpm)
Loader Hydraulic Pressure	3100 psi
Pump Flow Capacity	16 gpm (60 lpm)
Relief Valve Pressure	3103.9 psi

Loader

Breakout Force	3785.4 psi
Operating Load Rating	1,400 lbs (635 kg)
Tipping Angle	2799.9 degrees

Operating Specifications

Alternator Supplied Amperage	65 amps
Breakout Force - Lift Cylinder	3,057 lbs (1,387 kg)
Breakout Force - Tilt Cylinder	3,787 lbs (1,718 kg)
Chain Box Fluid Capacity - each side	2 gal (6 l)
Cooling System Fluid Capacity	3 gal (10 l)
Engine Oil Fluid Capacity	2 gal (8 l)
Fuel Capacity	17 gal (65 l)
Hydraulic System Fluid Capacity	15 gal (55 l)
Max Speed	8 mph (13 kph)
Operating Voltage	12 volts
Operational Weight	5,708 lbs (2,589 kg)
Rated Operating Capacity	1,400 lbs (635 kg)
Rated Operating Capacity with Optional Counterweight	1,500 lbs (680 kg)
Tipping Load	2,800 lbs (1,270 kg)
Tire Size	10x16.5 6PR

Power Train

Travel Speed Forward	8 mph (13 kph)
Travel Speed Reverse	8 mph (13 kph)

Service Refill Capacities

Chain Box - Each Side	2 gal (6 l)
Cooling System	3 gal (10 l)
Engine Crankcase	2 gal (8 l)
Fuel Tank	17 gal (64 l)
Hydraulic System	15 gal (55 l)
Hydraulic Tank	9 gal (35 l)

Weights

Operating Weight

5,709 lbs (2,590 kg)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon