List Your Equipment For Free  /  Seller Login


Caterpillar 228 Skid Steer Loader

The Caterpillar 228 Skid Steer Loader is a versatile and powerful machine designed for various construction and landscaping tasks. With a net flywheel power of 41 horsepower and a loader operating load rating of 1500 pounds, this compact loader can handle heavy loads with ease. Equipped with a hydraulic system flow capacity of 30.2 gallons per minute and an operational weight of 6070 pounds, the Caterpillar 228 offers efficiency and performance on the job site. Explore its dimensions, engine specifications, and operating capabilities to see how this skid steer loader can enhance your productivity.


See all Caterpillar 228s for sale

General Specifications

Cab

FOPSSAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I
FOPS Level IISAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional)
ROPSSAE J1040 MAY94 and ISO3471:1994

Dimensions

Bucket Pin Height - Carry Position9 in (23 cm)
Bucket Pin Height - Maximum Lift9 ft (3 m)
Bumper Overhang - Rear Axle38 in (97 cm)
Clearance at Max Lift and Dump7 ft (2 m)
Clearance at Maximum Lift and Dump84 in (213 cm)
Ground Clearance8 in (20 cm)
Length - With Bucket on Ground127 in (323 cm)
Length - Without Bucket99 in (251 cm)
Length w/o Bucket8 ft (3 m)
Length with Bucket11 ft (3 m)
Maximum Overall Height146 in (371 cm)
Reach - Maximum Lift/Dump20 in (51 cm)
Reach at Max Lift and Dump22 in (56 cm)
Turning Radius from Center - inc bucket81 in (205 cm)
Vehicle Width over Tires60 in (152 cm)
Wheel Base3 ft (1 m)
Wheelbase3 ft (1 m)
Width Over Tires5 ft (2 m)

Engine

Bore4 in (10 cm)
Displacement183 cu in (2,999 cu cm)
Engine MakeCaterpillar
Engine ModelCat 3034C
Net Flywheel Power41 hp (31 kw)
Number of Cylinders4
Power Measured @2600 rpm
Stroke4 in (10 cm)

Hydraulic System

Hydraulic FlowStandard flow
Loader Hydraulic Flow30 gpm (114 lpm)
Loader Hydraulic Pressure3300 psi
Pump Flow Capacity30 gpm (114 lpm)

Loader

Bucket Capacity1 cu yd (0 cu m)
Operating Load Rating1,500 lbs (680 kg)
Tipping Angle2800 degrees

Operating Specifications

Breakout Force - Lift Cylinder3,129 lbs (1,419 kg)
Breakout Force - Tilt Cylinder3,907 lbs (1,772 kg)
Fuel Capacity17 gal (65 l)
Hydraulic System Fluid Capacity15 gal (55 l)
Max Speed7 mph (11 kph)
Operating Speed7 mph (11 kph)
Operational Weight6,070 lbs (2,753 kg)
Rated Operating Capacity1,500 lbs (680 kg)
Rated Operating Capacity with Optional Counterweight1,600 lbs (726 kg)
Tipping Load3,000 lbs (1,361 kg)

Service Refill Capacities

Chain Box - Each Side2 gal (6 l)
Cooling System3 gal (10 l)
Engine Crankcase2 gal (7 l)
Fuel Tank17 gal (64 l)
Hydraulic System15 gal (55 l)
Hydraulic Tank9 gal (35 l)

Weights

Operating Weight5,843 lbs (2,650 kg)


39.95234 \\ -75.16379 \\ Fort Washington \\ PA