Categories ↠ Skid Steer Loaders ↠ Caterpillar 232B II

Caterpillar 232B II Skid Steer Loader

Category: Skid Steer Loaders ➔
Manufacturer: Caterpillar ➔
Model: 232B II ➔

The Caterpillar 232B II is a versatile skid steer loader designed for efficient performance on a variety of job sites. With a robust engine delivering 61 horsepower and a net flywheel power of 56 horsepower, this machine boasts a loader bucket capacity of 0.5 cubic yards and an operating load rating of 1900 pounds. Equipped with a hydraulic flow of 15.6 gallons per minute and a breakout force of 4060 pounds, the Caterpillar 232B II is a reliable choice for your next construction or landscaping project.

See all Caterpillar 232B IIs for sale

General Specifications

Cab

FOPS	SAE J1043 SEPT87 ISO 3449:1992 Level I
FOPS Level II	SAE J231 JAN81 ISO 3449:1992 Level II
ROPS	SAE J1040 MAY94 ISO 3471:1994

Dimensions

Bucket Pin Height - Carry Position	10 in (25 cm)
Bucket Pin Height - Maximum Lift	10 ft (3 m)
Bucket Pin Reach - Maximum Lift	285 in (724 cm)
Bumper Overhang - Rear Axle	39 in (99 cm)
Clearance at Max Lift and Dump	7 ft (2 m)
Clearance at Maximum Lift and Dump	88 in (224 cm)
Departure Angle	28 degrees
Ground Clearance	6 in (14 cm)
Height - Top of Cab	7 ft (2 m)
Length - With Bucket on Ground	135 in (343 cm)
Length - Without Bucket	109 in (276 cm)
Length w/o Bucket	9 ft (3 m)
Length with Bucket	11 ft (3 m)
Maximum Dump Angle	50 degrees
Maximum Overall Height	153 in (389 cm)
Maximum Reach - With Arms Parallel	48 in (123 cm)
Rack Back Angle - Maximum Height	86.9 degrees
Reach - Maximum Lift/Dump	30 in (76 cm)
Reach at Max Lift and Dump	30 in (76 cm)
Turn Radius from Center - Bucket	87 in (222 cm)
Turn Radius from Center - Coupler	57 in (144 cm)
Turn Radius from Center - Rear	61 in (154 cm)
Turning Radius from Center - inc bucket	87 in (222 cm)
Turning Radius from Center - machine rear	61 in (154 cm)
Vehicle Width over Tires	60 in (152 cm)
Wheel Base	4 ft (1 m)
Wheelbase	4 ft (1 m)
Width Over Tires	5 ft (2 m)

Engine

Bore	3 in (8 cm)
Displacement	134 cu in (2,196 cu cm)
Engine Make	Caterpillar
Engine Model	Cat C2.2 T
Gross Power - SAE J1995	61 hp (45 kw)
Net Flywheel Power	56 hp (42 kw)
Net Power - SAE 1349	56 hp (42 kw)
Number of Cylinders	4
Power Measured @	2600 rpm
Stroke	4 in (10 cm)

Hydraulic System

Hydraulic Flow	Standard
Hydraulic Power	30 hp (23 kw)
Loader Hydraulic Flow	16 gpm (59 lpm)
Loader Hydraulic Pressure	3335 psi
Pump Flow Capacity	16 gpm (59 lpm)
Relief Valve Pressure	3335 psi

Loader

Breakout Force	4060 psi
Bucket Capacity	1 cu yd (0 cu m)
Operating Load Rating	1,900 lbs (862 kg)
Tipping Angle	3956 degrees

Operating Specifications

Alternator Supplied Amperage	65 amps
Breakout Force - Tilt Cylinder	4,060 lbs (1,842 kg)
Chain Box Fluid Capacity - each side	2 gal (6 l)
Cooling System Fluid Capacity	3 gal (10 l)
Engine Oil Fluid Capacity	3 gal (10 l)
Fuel Capacity	15 gal (58 l)
Hydraulic System Fluid Capacity	15 gal (55 l)
Max Speed	7 mph (11 kph)
Operating Voltage	12 volts
Operational Weight	6,737 lbs (3,056 kg)
Rated Operating Capacity	1,900 lbs (862 kg)
Rated Operating Capacity with Optional Counterweight	1,945 lbs (882 kg)
Tipping Load	3,956 lbs (1,794 kg)

Power Train

Travel Speed Forward	7 mph (11 kph)
Travel Speed Reverse	7 mph (11 kph)

Service Refill Capacities

Chain Box - Each Side	2 gal (6 l)
Cooling System	3 gal (10 l)
Engine Crankcase	3 gal (10 l)
Fuel Tank	15 gal (58 l)
Hydraulic System	15 gal (55 l)
Hydraulic Tank	9 gal (35 l)

Weights

Operating Weight

6,737 lbs (3,056 kg)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon