Categories ↠ Skid Steer Loaders ↠ Caterpillar 262C

Caterpillar 262C Skid Steer Loader

Category: Skid Steer Loaders ➔
Manufacturer: Caterpillar ➔
Model: 262C ➔

The Caterpillar 262C Skid Steer Loader offers impressive performance and versatility for various construction and landscaping tasks. With a powerful Cat C3.4 DIT engine delivering 84 horsepower, this machine can handle heavy loads with ease. The loader has a rated operating capacity of 2700 pounds and a maximum reach of 50.5 inches with arms parallel. Equipped with a high flow hydraulic system, two-speed options, and a comfortable cab with ROPS and FOPS safety features, the 262C is a reliable and efficient choice for any job site.

See all Caterpillar 262Cs for sale

General Specifications

Cab

FOPS	SAE J1043 SEPT87 ISO 3449:1992 Level I
FOPS Level II	SAE J231 JAN81 ISO 3449:1992 Level II
ROPS	SAE J1040 MAY94 ISO 3471:1994

Dimensions

Bucket Pin Height - Carry Position	8 in (20 cm)
Bucket Pin Height - Maximum Lift	11 ft (3 m)
Bucket Pin Reach - Maximum Lift	15 in (37 cm)
Bumper Overhang - Rear Axle	43 in (109 cm)
Clearance at Max Lift and Dump	8 ft (2 m)
Clearance at Maximum Lift and Dump	96 in (245 cm)
Departure Angle	26 degrees
Ground Clearance	9 in (22 cm)
Height - Top of Cab	7 ft (2 m)
Length - With Bucket on Ground	145 in (368 cm)
Length - Without Bucket	117 in (297 cm)
Length w/o Bucket	10 ft (3 m)
Length with Bucket	12 ft (4 m)
Maximum Dump Angle	50 degrees
Maximum Overall Height	160 in (407 cm)
Maximum Reach - With Arms Parallel	51 in (128 cm)
Rack Back Angle - Maximum Height	85 degrees
Reach - Maximum Lift/Dump	31 in (78 cm)
Reach at Max Lift and Dump	31 in (78 cm)
Turn Radius from Center - Bucket	85 in (217 cm)
Turn Radius from Center - Coupler	55 in (139 cm)
Turn Radius from Center - Rear	68 in (173 cm)
Turning Radius from Center - inc bucket	98 in (248 cm)
Turning Radius from Center - machine rear	57 in (144 cm)
Vehicle Width over Tires	66 in (168 cm)
Wheel Base	4 ft (1 m)
Wheelbase	4 ft (1 m)
Width Over Tires	6 ft (2 m)

Engine

Bore	4 in (9 cm)
Displacement	201 cu in (3,294 cu cm)
Engine Make	Caterpillar
Engine Model	Cat C3.4 DIT
Engine Power - ISO 14396	83 hp (62 kw)
Gross Power - SAE J1995	84 hp (63 kw)
Net Flywheel Power	82 hp (61 kw)
Net Power - EEC 80/1269	83 hp (62 kw)
Net Power - ISO 9249 EEC	83 hp (62 kw)
Net Power - SAE 1349	82 hp (61 kw)
Number of Cylinders	4
Power Measured @	2500 rpm
Stroke	5 in (12 cm)

Hydraulic System

Hydraulic Flow (1)	Standard
Hydraulic Flow (2)	High Flow XPS
Hydraulic Power	43 hp (32 kw)
Loader Hydraulic Flow	22 gpm (83 lpm)
Loader Hydraulic Pressure	3335 psi
Maximum Loader Hydraulic Flow	33 gpm (125 lpm)
Maximum Loader Hydraulic Pressure	4061 psi
Pump Flow Capacity	22 gpm (83 lpm)
Relief Valve Pressure	3335 psi

Loader

Breakout Force	7315 psi
Bucket Capacity	1 cu yd (0 cu m)
Operating Load Rating	2,700 lbs (1,225 kg)
Operating Width	66 in (168 cm)
Tipping Angle	5400 degrees

Operating Specifications

Alternator Supplied Amperage	90 amps
Breakout Force - Tilt Cylinder	7,315 lbs (3,318 kg)
Chain Box Fluid Capacity - each side	3 gal (10 l)
Cooling System Fluid Capacity	4 gal (14 l)
Engine Oil Fluid Capacity	3 gal (10 l)
Fuel Capacity	26 gal (98 l)
Hydraulic System Fluid Capacity	15 gal (57 l)
Max Speed	8 mph (12 kph)
Operating Voltage	12 volts
Operational Weight	7,968 lbs (3,614 kg)
Rated Operating Capacity	2,700 lbs (1,225 kg)
Rated Operating Capacity with Optional Counterweight	2,945 lbs (1,336 kg)
Tipping Load	5,400 lbs (2,449 kg)

Power Train

Travel Speed Forward	8 mph (12 kph)
Travel Speed Forward - 2-Speed Option	12 mph (19 kph)
Travel Speed Reverse	8 mph (12 kph)
Travel Speed Reverse - 2-Speed Option	12 mph (19 kph)

Service Refill Capacities

Chain Box - Each Side	3 gal (10 l)
Cooling System	4 gal (14 l)
Engine Crankcase	3 gal (10 l)
Fuel Tank	26 gal (98 l)
Hydraulic System	15 gal (57 l)
Hydraulic Tank	11 gal (42 l)

Weights

Operating Weight

7,968 lbs (3,614 kg)

Caterpillar 262Cs currently for sale

A 2011 Caterpillar 262C From W.I. Clark Company for $29,500.00 USD

A 2010 Caterpillar 262C From Titan Machinery Inc for $28,910.00 USD

A Caterpillar 262C From Ziegler CAT for $19,800.00 USD

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon