Categories ↠ Skid Steer Loaders ↠ Caterpillar 262D

Caterpillar 262D Skid Steer Loader

Category: Skid Steer Loaders ➔
Manufacturer: Caterpillar ➔
Model: 262D ➔

General Specifications

ENGINE POWER HP (KW)	73 (54) Starting 2020 Model Year
OPERATING LOAD LBS. (KG)	2,700 (1,225) Starting 2016 Model Year
OPERATING WIDTH IN. (CM)	66 (168) Starting 2020 Model Year
RATED OPERATING CAPACITY LBS. (KG) (50%)	2,700 (1,225) Starting 2020 Model Year

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.

Cab

FOPS	ISO 3449:2005 Level I
FOPS Level II	ISO 3449:2005 Level II
ROPS	ISO 3471:2008

Dimensions

Bucket Pin Height - Carry Position	8 in (20 cm)
Bucket Pin Height - Maximum Lift	11 ft (3 m)
Bucket Pin Reach - Maximum Lift	16 in (39 cm)
Bumper Overhang - Rear Axle	43 in (108 cm)
Clearance at Max Lift and Dump	8 ft (2 m)
Clearance at Maximum Lift and Dump	94 in (238 cm)
Departure Angle	26 degrees
Ground Clearance	9 in (23 cm)
Height - Top of Cab	7 ft (2 m)
Hinge pin height - fully raised	125 in (317 cm)
Length - With Bucket on Ground	146 in (371 cm)
Length - Without Bucket	118 in (299 cm)
Length w/o Bucket	10 ft (3 m)
Length with Bucket	12 ft (4 m)
Maximum Dump Angle	51 degrees
Maximum Overall Height	158 in (401 cm)
Maximum Reach - With Arms Parallel	51 in (129 cm)
Rack Back Angle - Maximum Height	84 degrees
Reach - Maximum Lift/Dump	31 in (78 cm)
Reach at Max Lift and Dump	31 in (79 cm)
Turn Radius from Center - Bucket	86 in (218 cm)
Turn Radius from Center - Coupler	55 in (140 cm)
Turn Radius from Center - Rear	71 in (181 cm)
Turning Radius from Center - inc bucket	86 in (218 cm)
Turning Radius from Center - machine rear	71 in (181 cm)
Vehicle Width over Tires	66 in (168 cm)
Wheel Base	4 ft (1 m)
Wheelbase	4 ft (1 m)

Engine

Bore	4 in (9 cm)
Displacement	203 cu in (3,327 cu cm)
Engine Model	Cat C3.3B DIT (Turbo)
Gross Power - SAE J1995	74 hp (55 kw)
Max Torque	196 lbs ft (265 nm)
Net Flywheel Power	73 hp (54 kw)
Net Power - ISO 9249 EEC	74 hp (55 kw)
Net Power - SAE 1349	73 hp (54 kw)
Stroke	5 in (12 cm)
Torque Measured @	1500 rpm

Hydraulic System

Hydraulic Flow (1)	Standard
Hydraulic Flow (2)	High Flow XPS
Pump Flow Capacity	32 gpm (121 lpm)

Loader

Operating Load Rating	2,700 lbs (1,225 kg)
Operating Width	66 in (168 cm)

Operating Specifications

Alternator Supplied Amperage	80 amps
Breakout Force - Tilt Cylinder	7,355 lbs (3,336 kg)
Chain Box Fluid Capacity - each side	3 gal (13 l)
Cooling System Fluid Capacity	4 gal (14 l)
Fuel Capacity	25 gal (94 l)
Hydraulic System Fluid Capacity	14 gal (52 l)
Max Speed	8 mph (12 kph)
Operating Voltage	12 volts
Operational Weight	8,012 lbs (3,634 kg)
Rated Operating Capacity	2,700 lbs (1,225 kg)
Rated Operating Capacity with Optional Counterweight	2,950 lbs (1,338 kg)
Tipping Load	5,400 lbs (2,449 kg)
Tire Size	12 Ã— 16.5

Power Train

Travel Speed Forward	8 mph (12 kph)
Travel Speed Forward - 2-Speed Option	11 mph (18 kph)
Travel Speed Reverse	8 mph (12 kph)
Travel Speed Reverse - 2-Speed Option	11 mph (18 kph)

Service Refill Capacities

Chain Box - Each Side	3 gal (12 l)
Cooling System	4 gal (14 l)
Engine Crankcase	3 gal (11 l)
Fuel Tank	25 gal (94 l)
Hydraulic System	14 gal (52 l)
Hydraulic Tank	10 gal (39 l)

Weights

Operating Weight

8,011 lbs (3,634 kg)

Caterpillar 262Ds currently for sale

A Caterpillar 262D From Finning CAT for $79,500.00 USD

A Caterpillar 262D From Tractor and Equipment CAT for $57,000.00 USD

A Caterpillar 262D From MacAllister Machinery Co., Inc. for $54,500.00 USD

A Caterpillar 262D From Butler Machinery for $50,000.00 USD

A 2017 Caterpillar 262D From Five Star Equipment, Inc. for $50,000.00 USD

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon