Categories ↠ Skid Steer Loaders ↠ John Deere 260

John Deere 260 Skid Steer Loader

Category: Skid Steer Loaders ➔
Manufacturer: John Deere ➔
Model: 260 ➔

General Specifications

Dimensions

Clearance at Max Lift and Dump	9 ft (3 m)
Ground Clearance	11 in (28 cm)
Height - Top of Cab	7 ft (2 m)
Length w/o Bucket	10 ft (3 m)
Length with Bucket	12 ft (4 m)
Reach at Max Lift and Dump	32 in (81 cm)
Turning Radius from Center - inc bucket	84 in (213 cm)
Turning Radius from Center - machine rear	69 in (175 cm)
Wheelbase	4 ft (1 m)
Width Over Tires	6 ft (2 m)

Engine

Displacement	179 cu in (2,933 cu cm)
Engine Model	3029T
Number of Cylinders	3
Power Measured @	2400 rpm

Hydraulic System

Pump Flow Capacity	33 gpm (125 lpm)
Pump Type	3-spoon open center
Relief Valve Pressure	3100 psi

Loader

Breakout Force	7500 psi
Operating Load Rating	2,400 lbs (1,089 kg)
Tipping Angle	5000 degrees

Operating Specifications

Alternator Supplied Amperage	55 amps
Cooling System Fluid Capacity	3 gal (11 l)
Fuel Capacity	20 gal (76 l)
Hydraulic System Fluid Capacity	9 gal (34 l)
Max Speed	12 mph (19 kph)
Operating Speed	7 mph (11 kph)
Operating Voltage	12 volts
Operational Weight	8,250 lbs (3,742 kg)
Tire Size	14x17.5 SKS. 12PR

John Deere 260s currently for sale

A 2000 John Deere 260 From Elwood JCB for $17,000.00 USD

A 2000 John Deere 260 From Brooks Tractor for $14,500.00 USD

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon