Categories ↠ Skid Steer Loaders ↠ New Holland L223

New Holland L223 Skid Steer Loader

Category: Skid Steer Loaders ➔
Manufacturer: New Holland ➔
Model: L223 ➔

General Specifications

Dimensions

Bucket hinge pin fully raised	10,794 ft (3,290 m)
Dump angle	55 degrees
Dump height - fully raised, 45 degrees dump	123 in (312 cm)
Ground Clearance	8 in (20 cm)
Height - Top of ROPS/FOPS	79 in (200 cm)
Overall width	6 ft (2 m)
Reach at Max Lift and Dump	32 in (82 cm)
Wheelbase	4 ft (1 m)
Width Over Tires	5 ft (1 m)

Engine

Aspiration	Turbo
Displacement	195 cu in (3,200 cu cm)
Engine Make	FPT
Engine Model	F5C E9454
Max Torque	203 lbs ft (275 nm)
Number of Cylinders	4
Power Measured @	2500 rpm
Torque Measured @	1400 rpm

Hydraulic System

3.9	3.9 sec seconds
Displacement-High-flow aux	1 cu in (20 cu cm)
Displacement-Standard aux	2 cu in (34 cu cm)
Dump Time	2.7 seconds
Lower Time	2.5 seconds
Pump Flow Capacity	23 gpm (85 lpm)
Pump Type	Gear
Relief Valve Pressure	3000 psi

Loader

Operating Load Rating	2,250 lbs (1,021 kg)
Operating Width	69 in (176 cm)

Operating Specifications

Engine Oil Fluid Capacity	3 gal (10 l)
Fuel Capacity	26 gal (97 l)
Hydraulic System Fluid Capacity	6 gal (23 l)
Max Speed	12 mph (19 kph)
Operational Weight	7,386 lbs (3,350 kg)
Shipping Weight - Empty	7,055 lbs (3,200 kg)
Tire Size	12x 16.5

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon