Categories ↠ Smooth Drum Rollers ↠ Hamm H25i

Hamm H25i Smooth Drum Roller

Category: Smooth Drum Rollers ➔
Manufacturer: Hamm ➔
Model: H25i ➔

General Specifications

Dimensions

Angle of driving slope-Front	43 degrees
Angle of driving slope-Rear	28 degrees
Ground Clearance	15 in (39 cm)
Height - Top of Cab	10 ft (3 m)
Loadover height	8 ft (2 m)
Overall Length	260 in (660 cm)
Turning Radius - Inside	14 ft (4 m)
Wheelbase	129 in (327 cm)
Width over cab	99 in (251 cm)

Drum

Centrifugal Force - High	74,412 lbs (33,753 kg)
Centrifugal Force - Low	54,404 lbs (24,677 kg)
Drum Diameter	63 in (160 cm)
Drum thickness	2 in (5 cm)
Drum Type	smooth
Drum Width	84 in (214 cm)
Nominal Amplitude - High	0 in (0 cm)
Nominal Amplitude - Low	0 in (0 cm)
Static Linear Load	776 lbs in
Vibration Frequency 1	27 vpm
Vibration Frequency 2	30 vpm

Engine

Diesel Fuel Tank Capacity - Standard Tank	9 gal (32 l)
Emissions Certification	EU Stage IV / EPA Tier 4
Engine Make	Deutz
Engine Model	TCD 6.1 L6
Engine power@ISO 14396	215 hp (160 kw)
Engine power@SAEJ1349	215 hp (160 kw)
Exhaust Gas Recirculation (EGR)	DOC-DPF-SCR
Number of Cylinders	6
Power Measured @	2300 rpm

Operating Specifications

Axle load - front	36,630 lbs (16,615 kg)
Axle load - rear	18,078 lbs (8,200 kg)
Fuel Capacity	74 gal (280 l)
Max Speed	12 mph (19 kph)
Max Weight	55,005 lbs (24,950 kg)
Operating weight Cabin	54,708 lbs (24,815 kg)

Speeds

Size of tyres, rear

EM 23.5-R25 XTLA

Steering System

Oscillating angle	10 degrees
Steering Method	Articulated steering

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon