Categories ↠ Smooth Drum Rollers ↠ JCB VM 137 D

JCB VM 137 D Smooth Drum Roller

Category: Smooth Drum Rollers ➔
Manufacturer: JCB ➔
Model: VM 137 D ➔

General Specifications

Capacities

Engine Oil	4 gal (14 l)
Fuel Tank	75 gal (285 l)
Gear oil	2 gal (8 l)
Hydraulic oil tank	20 gal (75 l)

Dimensions

Axle to rear face	69 in (176 cm)
front Departure angle	46 degrees
Ground Clearance	18 in (45 cm)
Height	7 ft (2 m)
Height - Top of ROPS/FOPS	10 ft (3 m)
Overall Width	7 ft (2 m)
Rear Departure Angle	32
Total travel length	224 in (569 cm)
Wheelbase	115 in (293 cm)

Drum

Drum Diameter	59 in (150 cm)
Drum thickness	1 in (3 cm)
Drum Width	83 in (210 cm)

Electrical System

Alternator	60
Battery capacity	120 Ah
Voltage	12

Engine

Bore	4 in (11 cm)
Cooling system	Water
Displacement	293 cu in (4,801 cu cm)
Emissions compliance	T4i Stage IIIb
Engine Make	JCB
Engine Model	448/EcoMAX
Number of Cylinders	4
Performance	145 hp (108 kw)
Power Measured @	2200 rpm
Stroke	5 in (14 cm)
Torque	413 lbs ft (560 nm)

Operating Specifications

Amplitude	0 in (0 cm)
Centrifugal force	63,396 lbs (28,756 kg)
Inside Turning Radius	133 in (338 cm)
Operating Weight	32,077 lbs (14,550 kg)
Operating weight Cabin	27,668 lbs (12,550 kg)
Operating weight ROPS	26,786 lbs (12,150 kg)
Smooth drum_Static linear load	76 lbs (34 kg)
Travel Speed	7 mph (11 kph)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon