- Category: Tractors ➔
- Manufacturer: John Deere ➔
- Model: 2038R ➔
Introducing the John Deere 2038R tractor, a reliable and efficient machine designed for a variety of agricultural tasks. With a powerful engine manufactured by Yanmar, this tractor boasts a Gross Power of 36.8 hp and a maximum operating pressure of 2500 psi in its Hydraulic System. Equipped with a Direct Injection system and Final Tier 4 Emissions compliance, the 2038R is built for optimum performance while meeting environmental standards. From its compact design with a flat operator platform to its 3-Point Hitch Category 1 and 615 kg lift capacity, this tractor is ready to tackle any job with ease.
General Specifications
3-Point Hitch
Lift capacity (24-in. behind link arms) | 615 kg (1,356 lbs)
|
Dimensions
Shipping weight | 1,105 kg (2,436 lbs)
|
Turning radius with brakes | 3 m (9 ft)
|
Turning radius without brakes | 10 ft (3 m)
|
Wheelbase | 68 ft (21 m)
|
Electrical System
Alternator (12-V) | 85 amp
|
Battery size | 500 CCA
|
Starter size | 2 hp (1 kw)
|
Engine
Air cleaner | Dual element
|
Aspiration | Turbocharged
|
Bore | 3 in (9 cm)
|
Compression ratio | 19.1:1
|
Cooling system | Water pump
|
Cylinder liners | Cast-In-Block
|
Displacement | 96 cu in (1,568 cu cm)
|
Emissions compliance | Final Tier 4
|
Engine Manufacturer | Yanmar
|
Engine Model | 3TNV88C-NJT
|
Engine torque at rated speed | 101.4 Nm
|
Engine Type | Direct Injection
|
Family | GYDXL1.57TDA
|
Fuel tank capacity | 9 gal (32 l)
|
Gross Power | 37 hp (27 kw)
|
Injection pump type | Direct Injection
|
Lubrication | Pressurized
|
Number of Cylinders | 3
|
Power take-off (PTO) power | 30 hp (23 kw)
|
Rated engine speed | 2500 rpm
|
Stroke | 4 in (9 cm)
|
Final Drive
Differential lock | Yes
|
Final Drive Type | Spur Gear
|
Fluid Capacities
Crankcase with filter | 4.5 L
|
Fuel System
Fuel System Type | Direct Injection
|
Hydraulic System
Draft control sensing | Position control
|
Hydraulic Type | Open Center
|
Maximum operating pressure | 2500 psi
|
Pump rated output | Steering - 15 L/min Implement - 20.2 L/min
|
Pump Type | Gear
|
Remote control valves available | Up to three
|
Operator Station
Gear shift location - console/floor | Left Hand Side
|
Platform - flat/straddle | Flat
|
Rollover protective structure | Foldable ASABE S478
|
Power Take-Off (PTO)
Brake (for mid and rear PTO) | Wet disc
|
Clutch | Independent
|
Control | Independent
|
Standard | Rear - 540 rpm Mid - 2000 rpm
|
Tires
Front Tires Size | R1 Ag 7.00-12 R3 Turf 23x8.50-14 R4 Industrial 23x8.50-14 R3 Turf Radial 200/60 R15
|
Rear Tires Size | R1 Ag 12.4-16 R3 Turf 14-17.5 R4 Industrial 14-17.5 R3 Turf Radial 300/70 R20
|
Transmission
Axle capacity | Front - 880 kg Rear - 1089 kg
|
Brakes | Wet disc
|
Creeper | No
|
Cruise control | Standard
|
Differential lock | Yes
|
Final Drive Type | Bull Gear
|
Standard transmission; forward/reverse | Hydrostatic transmission (HST)
|
Steering | Power steering
|