John Deere 8560 Tractor

Category: Tractors ➔
Manufacturer: John Deere ➔
Model: 8560 ➔

General Specifications

Dimensions

Front Axle Clearance	96 in (244 cm)
Front Wheel Tread Width	129 in (328 cm)
Overall Length	223 in (567 cm)
Rear axle clearance	8 ft (2 m)
Rear Tread Range	129 in (328 cm)
Shipping weight	29,319 lbs (13,299 kg)
Wheelbase	10 ft (3 m)

Engine

Aspiration	Turbocharged
Bore	5 in (13 cm)
Displacement	616 cu in (10,101 cu cm)
Engine Make	John Deere
Gross Power	290 hp (216 kw)
Number of Cylinders	6
Power Measured @	2100 rpm
PTO Power	235 hp (175 kw)
Stroke	5 in (13 cm)

Hydraulic System

Hydraulic System Type	Closed-center constant pressure
Number of Remote Control Valves	2 to 4
Pump Flow Capacity	38 gpm (142 lpm)

Operating Specifications

3 Point Hitch Lift Capacity @ 24 inches	9,260 lbs (4,200 kg)
3 Point Hitch Type	3/3N
Alternator Supplied Amperage	110 amps
Cooling System Fluid Capacity	12 gal (45 l)
Engine Oil Capacity	7 gal (27 l)
Front Tire Size	18.4-38
Fuel Capacity	214 gal (810 l)
Hydraulic System Fluid Capacity	38 gal (142 l)
Operating Voltage	6 volts
Operating Weight	30,270 lbs (13,730 kg)
Rear Tire Size	18.4-38

Transmission

Max Speed - Forward	20 mph (33 kph)
Max Speed - Reverse	14 mph (22 kph)
Number of Forward Gears	16
Number of Reverse Gears	6
Transmission Type	Partial power shift

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon