Categories ↠ Truck Cranes ↠ Link-Belt HTT-8675 II

Link-Belt HTT-8675 II Truck Crane

Category: Truck Cranes ➔
Manufacturer: Link-Belt ➔
Model: HTT-8675 II ➔

General Specifications

Boom

Max Elevating Angle	80 degrees
Max Height @ Max Raise Angle - no jib	136 ft (41 m)
Min Height @ Max Raise Angle	86 ft (26 m)
Number of Sections	4

CARRIER ENGINE

Displacement	915 cu in (15,001 cu cm)
Gross Power	450 hp (336 kw)
Make	Link-Belt
Max Torque	1,550 lbs ft (2,102 nm)
Net Power	480 hp (358 kw)
Power Measured @	1800 rpm
Torque Measured @	1400 rpm

Dimensions

Carrier Length	14 ft (4 m)
Ground Clearance	11 ft (3 m)
Transport Height	12 ft (4 m)
Transport Length	49 ft (15 m)
Transport Width	15 ft (5 m)
Upper Structure Tail Swing Radius	14 ft (4 m)
Wheelbase	23 ft (7 m)
Width w/ Outriggers Extended	26 ft (8 m)

Operating Specifications

DEF tank capacity	10 gal (38 l)
Fuel Capacity	80 gal (303 l)
Ground Pressure	40 psi
Operating Voltage	12 volts
Upper Structure Hydraulic System Fluid Capacity	144 gal (545 l)

Tires

Front 445/65R22.5 / Rear 445/65R22.5

Transmission

Number of Forward Gears	12
Number of Reverse Gears	2

UPPER STRUCTURE ENGINE

Displacement	726 cu in (11,900 cu cm)
Gross Power	414 hp (309 kw)
Make	Link-Belt
Max Torque	1,550 lbs ft (2,102 nm)
Net Power	450 hp (336 kw)
Power Measured @	1800 rpm
Torque Measured @	1200 rpm

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon