Case 721B Wheel Loader

Category: Wheel Loaders ➔
Manufacturer: Case ➔
Model: 721B ➔

General Specifications

Bucket

Breakout Force	27,629 lbs (12,532 kg)
Bucket Capacity - heaped	3 cu yd (2 cu m)
Bucket Capacity - struck	2 cu yd (2 cu m)
Bucket Width	8 ft (3 m)

Dimensions

Ground Clearance	1 ft (0 m)
Height - Top of Cab	11 ft (3 m)
Hinge Pin - Max Height	12 ft (4 m)
Length with Bucket on Ground	23 ft (7 m)
Wheelbase	10 ft (3 m)
Width Over Tires	8 ft (2 m)

Engine

Aspiration	Turbocharged
Bore	5 in (11 cm)
Engine Model	6T-830
Engine Type	4 stroke Direct injection
Gross Power	152 hp (113 kw)
Max torque ISO TR14396	458 lbs ft (621 nm)
Net Power	137 hp (102 kw)
Number of Cylinders	6
Power Measured @	2100 rpm
Stroke	5 in (14 cm)
Torque Measured @	1500 rpm

Hydraulic System

Dump Time	1.8 seconds
Lower Time	4.6 seconds
Pump Flow Capacity	58 gpm (218 lpm)
Pump Type	Hydraulic tandem pump
Raise Time	5.9 seconds

Operating Specifications

Alternator Supplied Amperage	65 amps
Engine Oil Fluid Capacity	6 gal (21 l)
Front Axle/Diff Fluid Capacity	4 gal (15 l)
Fuel Capacity	54 gal (204 l)
Hydraulic System Fluid Capacity	41 gal (153 l)
Operating Voltage	24 volts
Operating Weight	29,763 lbs (13,500 kg)
Rear Axle/Diff Fluid Capacity	3 gal (10 l)

Transmission

Max Speed - Forward	22 mph (36 kph)
Max Speed - Reverse	14 mph (23 kph)
Number of Forward Gears	4
Number of Reverse Gears	4
Transmission Type	Mechanical

Case 721Bs currently for sale

A 1998 Case 721B From JL Hollinger & Sons for $28,000.00 USD

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon