Categories ↠ Wheel Loaders ↠ Caterpillar 904H

Caterpillar 904H Wheel Loader

Category: Wheel Loaders ➔
Manufacturer: Caterpillar ➔
Model: 904H ➔

The Caterpillar 904H Wheel Loader offers versatile performance with a bucket capacity of 1.3 cubic yards and a maximum reach of 7.9 feet. Powered by a turbocharged Mitsubishi engine delivering 52 horsepower, this loader boasts a hydraulic system with a pump flow capacity of 22 gallons per minute. With operating weights just under 10,000 pounds and a maximum speed of 12.5 mph, the 904H is equipped to handle a variety of tasks efficiently and effectively.

See all Caterpillar 904Hs for sale

General Specifications

Bucket

Bucket Capacities	1 cu yd (1 cu m)
Bucket Capacity - heaped	1 cu yd (1 cu m)
Bucket Width	6 ft (2 m)
Dump Clearance at Max Raise	8 ft (2 m)

Cab

FOPS	SAE J/ISO 3449 APR98 Level I and II; ISO 3449:1994 Level I and II
ROPS	SAE J1040 MAY94 ISO 3471:1994

Dimensions

Ground Clearance	1 ft (0 m)
Height - Top of Cab	8 ft (2 m)
Hinge Pin - Max Height	10 ft (3 m)
Length with Bucket on Ground	16 ft (5 m)
Reach at Max Lift and Dump	2 ft (1 m)
Wheelbase	6 ft (2 m)
Width Over Tires	5 ft (2 m)

Engine

Aspiration	Turbocharged
Bore	4 in (9 cm)
Displacement	153 cu in (2,507 cu cm)
EEC 80/1269 Rating	52 hp (39 kw)
Engine Model	MHI S4Q2-T
Gross Power	55 hp (41 kw)
ISO 9249 Rating	52 hp (39 kw)
Make	Mitsubishi
Net Power	52 hp (39 kw)
Number of Cylinders	4
Power Measured @	2400 rpm
SAE J1349 Rating	52 hp (39 kw)
Stroke	4 in (10 cm)

Hydraulic System

3rd Valve Flow	22 gpm (83 lpm)
Dump Time	0.8 seconds
Hydraulic Cycle Time - Dump	0.8econds seconds
Hydraulic Cycle Time - Lift	4.5econds seconds
Hydraulic Cycle Time - Lower, Float	3.2econds seconds
Lower Time	3.2 seconds
Main Relief	3000 psi
Pump Flow Capacity	22 gpm (83 lpm)
Raise Time	4.5 seconds
Relief Valve Setting	3000 psi

Operating Specifications

Alternator Supplied Amperage	90 amps
Breakout Force	8,003 lbs (3,630 kg)
Cooling System Fluid Capacity	2 gal (8 l)
Engine Oil Fluid Capacity	2 gal (8 l)
Fuel Capacity	22 gal (83 l)
Full Turn Static Tipping Load - Bucket	5,511 lbs (2,500 kg)
Hydraulic System Fluid Capacity	11 gal (43 l)
Operating Weight	9,899 lbs (4,490 kg)
Rack Back - Transport Position	49 degrees
Rated Bucket Capacity	1 cu yd (1 cu m)
Rated Operating Load at Full Turn - Bucket	2,756 lbs (1,250 kg)
Static Tipping Weight	6,614 lbs (3,000 kg)
Straight Tipping Load - Bucket	6,614 lbs (3,000 kg)
Tire Size	12-16.5 10PR

Service Refill Capacities

Cooling System	2 gal (8 l)
Engine Oil	2 gal (8 l)
Fuel Tank	22 gal (83 l)
Hydraulic System	11 gal (42 l)

Transmission

Max Speed - Forward	13 mph (20 kph)
Max Speed - Reverse	13 mph (20 kph)
Number of Forward Gears	2
Number of Reverse Gears	2
Transmission Type	Hydrostatic
Travel Speed 1	4 mph (7 kph)
Travel Speed 2	12 mph (20 kph)

Weights

Operating Weight	9,900 lbs (4,491 kg)
Operational Weight	9,900 lbs (4,491 kg)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon