Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
The Caterpillar 910 Wheel Loader boasts a powerful engine, with a net power of 65 hp and a displacement of 317.4 cu in. It is equipped with a double-section gear hydraulic pump type, providing efficient operation with a dump time of 1.3 seconds and a raise time of 6 seconds. With an operating weight of 14,210 lbs and a bucket capacity of 1.4 cu yd, this wheel loader offers versatility and reliability for various construction and material handling tasks.
?Model | 910 Starting 2024 Model Year |
Breakout Force | 13,567 lbs ft (18,394 nm) Starting 2021 Model Year |
Bucket Capacity | 2.16 cu yd Starting 2023 Model Year |
Bucket Capacity cu. yd. (cu m) | 1.7 - 4.6 (1.3 - 3.5) Starting 2020 Model Year |
Engine | C4.4 ACERT Starting 2021 Model Year |
Engine Power hp (kw) | 100 (74.6) Starting 2023 Model Year |
Engine type | Cat C3.6 Starting 2024 Model Year |
Full-Turn Tipping Load | 10,957 lbs (4,970 kg) Starting 2021 Model Year |
Max Dump Height | 9 ft (3 m) Starting 2021 Model Year |
Max Dump Height ft. (m) | 9.1 (2.7) Starting 2020 Model Year |
Net Power | 111 hp (83 kw) Starting 2021 Model Year |
Operating Weight | 17,822 lbs (8,084 kg) Starting 2021 Model Year |
Operating?Weight | 11,632 (5,276) Starting 2020 Model Year |
Rated Bucket Capacity | 1.7 cu yd Starting 2021 Model Year |
Tip Load | 13,237 (6,004) Starting 2023 Model Year |
Travel Speed (Fwd/Rev) | 25 / 25 mph Starting 2023 Model Year |
Travel Speed | 25 / 12.5 mph Starting 2024 Model Year |
Breakout Force | 11632-16,291 lbs (5,276-7,389 kg) |
Bucket Capacity - heaped | 1 cu yd (1 cu m) |
Bucket Width | 7 ft (2 m) |
Dump Clearance at Max Raise | 8 ft (2 m) |
Ground Clearance | 1 ft (0 m) |
Height - Top of Cab | 10 ft (3 m) |
Hinge Pin - Max Height | 10 ft (3 m) |
Length with Bucket on Ground | 18 ft (5 m) |
Reach at Max Lift and Dump | 3 ft (1 m) |
Wheelbase | 8 ft (2 m) |
Width Over Tires | 7 ft (2 m) |
Displacement | 317 cu in (5,201 cu cm) |
Engine Model | C3.6 |
Net Power | 65 hp (48 kw) |
Number of Cylinders | 4 |
Power Measured @ | 2400 rpm |
Dump Time | 1.3 seconds |
Lower Time | 3.5 seconds |
Pump Type | double section gear |
Raise Time | 6 seconds |
Relief Valve Setting | 2500 psi |
Alternator Supplied Amperage | 40 amps |
Cooling System Fluid Capacity | 7 gal (25 l) |
Engine Oil Fluid Capacity | 3 gal (11 l) |
Front Axle/Diff Fluid Capacity | 4 gal (15 l) |
Fuel Capacity | 30 gal (113 l) |
Hydraulic System Fluid Capacity | 15 gal (57 l) |
Operating Voltage | 12 volts |
Operating Weight | 14210-18,102 lbs (6,446-8,211 kg) |
Rear Axle Oscillation | 22 degrees |
Rear Axle/Diff Fluid Capacity | 4 gal (15 l) |
Static Tipping Weight | 9,877 lbs (4,480 kg) |
Tire Size | 15.5 x 25.8 PR |
Transmission Fluid Capacity | 6 gal (23 l) |
Turning Radius | 16 ft (5 m) |
Max Speed - Forward | 15 mph (24 kph) |
Max Speed - Reverse | 7 mph (11 kph) |
Number of Forward Gears | 3 |
Number of Reverse Gears | 1 |
Transmission Type | Planetary power shift |