- Category: Wheel Loaders ➔
- Manufacturer: Caterpillar ➔
- Model: 930K ➔
The Caterpillar 930K Wheel Loader boasts impressive power and performance capabilities for various construction and material handling tasks. With a bucket capacity of 6.5 cubic yards and a maximum lift height of 12.8 feet, this machine offers versatility and efficiency on the job site. Equipped with a reliable C7.1 ACERT engine delivering 154 horsepower, along with a hydraulic system that ensures quick and precise operations, the 930K is a top choice for heavy-duty operations. With a range of operational specifications and service refill capacities, this wheel loader is designed to maximize productivity and minimize downtime.
General Specifications
Bucket
Bucket Capacities | 7 cu yd (5 cu m)
|
Dump Clearance at Max Raise | 9 ft (3 m)
|
Cab
FOPS | SAE J/ISO 3449 APR98 Level II ISO 3449 1992 Level II
|
ROPS | SAE J1040 MAY94 ISO 3471-1994
|
Dimensions
Bucket Pin Height - Maximum Lift | 13 ft (4 m)
|
Carry Height | 2 ft (0 m)
|
Centerline of Front Axle to Hitch | 5 ft (1 m)
|
Digging Depth | 4 in (10 cm)
|
Dump Angle at Maximum Lift | 49 degrees
|
Dump Clearance at Maximum Lift - 45 degrees | 9 ft (3 m)
|
Height - Center of Axle | 2 ft (1 m)
|
Height - Top of ROPS/FOPS | 11 ft (3 m)
|
Length - Rear Axle to Bumper | 7 ft (2 m)
|
Overall Height - Bucket Raised | 17 ft (5 m)
|
Overall Length | 25 ft (8 m)
|
Rack Back Angle - Carry | 45 degrees
|
Rack Back Angle - Maximum Lift | 54 degrees
|
Reach at Maximum Lift and 45 degrees Dump | 3 ft (1 m)
|
Wheel Base | 10 ft (3 m)
|
Engine
Bore | 4 in (10 cm)
|
Displacement | 402 cu in (6,588 cu cm)
|
EEC 80/1269 | 156 hp (116 kw)
|
Engine Model | C7.1 ACERT
|
Gross Power | 154 hp (115 kw)
|
Net Power | 152 hp (113 kw)
|
Net Torque | 551 lbs ft (747 nm)
|
Number of Cylinders | 6
|
Rated Net Power | 154 hp (115 kw)
|
Stroke | 5 in (13 cm)
|
Hydraulic System
Dump Time | 1.7 seconds
|
Lower Time | 2.7 seconds
|
Pump Flow Capacity | 50 gpm (189 lpm)
|
Raise Time | 5.7 seconds
|
Relief Valve Setting | 3626 psi
|
Loader Hydraulic System
Bore (1) | 5 in (12 cm)
|
Bore (2) | 6 in (15 cm)
|
Dump | 1.5 seconds
|
Hydraulic Cycle Time | 9.3 seconds
|
Lower, Empty, Float Down | 2.7 seconds
|
Pump Flow - Implement Pump | 50 gpm (189 lpm)
|
Raise | 5.1 seconds
|
Stroke (1) | 29 in (73 cm)
|
Stroke (2) | 22 in (56 cm)
|
Total | 9.3 seconds
|
Operating Specifications
Articulation Angle | 40 degrees
|
Cooling System Fluid Capacity | 9 gal (32 l)
|
Dump Clearance at Full Lift and 45 degrees Dump Angle | 9 ft (3 m)
|
Front Axle/Diff Fluid Capacity | 7 gal (26 l)
|
Fuel Capacity | 52 gal (195 l)
|
Hydraulic System Fluid Capacity | 44 gal (165 l)
|
Operating Weight | 28,948 lbs (13,131 kg)
|
Rated Bucket Capacity | 2.7-7 cu yd (2-5 cu m) |
Reach - Full Lift and 45 degrees Dump | 3 ft (1 m)
|
Rear Axle/Diff Fluid Capacity | 7 gal (26 l)
|
Static Tipping Load - Full Turn | 18,444 lbs (8,366 kg)
|
Tire Size | 20.5
|
Transmission Fluid Capacity | 2 gal (8 l)
|
Service Refill Capacities
Cooling System | 8 gal (30 l)
|
Crankcase | 5 gal (20 l)
|
Front | 7 gal (26 l)
|
Fuel Tank | 52 gal (195 l)
|
Hydraulic Tank | 24 gal (90 l)
|
Rear | 7 gal (25 l)
|
Transmission | 2 gal (8 l)
|
Steering System
Maximum Working Pressure | 3500 psi
|
Steering Angle - Each Direction | 40 degrees
|
Steering Articulation | 40 degrees
|
Steering Cylinder, Two, Bore | 3 in (7 cm)
|
Tires
Size | 20.5 R25 radial (L-3)
|
Transmission
2 Forward | 8 mph (13 kph)
|
3 Forward | 17 mph (27 kph)
|
4 Forward | 25 mph (40 kph)
|
Forward - 1 | 8 mph (13 kph)
|
Max Speed - Forward | 25 mph (40 kph)
|
Max Speed - Reverse | 25 mph (40 kph)
|
Number of Forward Gears | 4
|
Number of Reverse Gears | 4
|
Reverse - 1 | 8 mph (13 kph)
|
Weights
Operating Weight | 30,479 lbs (13,825 kg)
|
Operational Weight | 30,479 lbs (13,825 kg)
|