Clark 55C Wheel Loader

Category: Wheel Loaders ➔
Manufacturer: Clark ➔
Model: 55C ➔

General Specifications

Bucket

Bucket Capacity - heaped	2 cu yd (2 cu m)
Bucket Capacity - struck	2 cu yd (1 cu m)
Bucket Width	8 ft (3 m)
Dump Clearance at Max Raise	9 ft (3 m)

Dimensions

Ground Clearance	1 ft (0 m)
Height - Top of Cab	10 ft (3 m)
Hinge Pin - Max Height	12 ft (4 m)
Length with Bucket on Ground	22 ft (7 m)
Reach at Max Lift and Dump	3 ft (1 m)
Wheelbase	9 ft (3 m)
Width Over Tires	7 ft (2 m)

Engine

Displacement	378 cu in (6,201 cu cm)
Engine Model	V-378C
Gross Power	123 hp (92 kw)
Net Power	115 hp (86 kw)

Hydraulic System

Dump Time	2 seconds
Lower Time	3.5 seconds
Pump Flow Capacity	42 gpm (157 lpm)
Pump Type	gear type
Raise Time	6.5 seconds
Relief Valve Setting	2400 psi

Operating Specifications

Alternator Supplied Amperage	70 amps
Cooling System Fluid Capacity	10 gal (36 l)
Engine Oil Fluid Capacity	4 gal (14 l)
Front Axle/Diff Fluid Capacity	3 gal (11 l)
Fuel Capacity	40 gal (151 l)
Hydraulic System Fluid Capacity	32 gal (120 l)
Operating Voltage	12 volts
Operating Weight	23,709 lbs (10,754 kg)
Rear Axle Oscillation	18 degrees
Rear Axle/Diff Fluid Capacity	3 gal (11 l)
Static Tipping Weight	171 lbs (78 kg)
Tire Size	17.5-25
Transmission Fluid Capacity	5 gal (19 l)
Turning Radius	19 ft (6 m)

Transmission

Max Speed - Forward	17 mph (28 kph)
Max Speed - Reverse	17 mph (28 kph)
Number of Forward Gears	3
Number of Reverse Gears	3
Transmission Type	Clark countershaft powershift

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon