JCB 426ZX Wheel Loader

Category: Wheel Loaders ➔
Manufacturer: JCB ➔
Model: 426ZX ➔

General Specifications

Bucket

Bucket Width	8 ft (3 m)
Dump Clearance at Max Raise	9 ft (3 m)

Dimensions

Dump Clearance at Max Lift	10 ft (3 m)
Fork Tine Length	4 ft (1 m)
Ground Clearance	2 ft (0 m)
Hinge Pin - Max Height	12 ft (4 m)
Hinge Pin Max Height	13 ft (4 m)
Length w/ Bucket on Ground	23 ft (7 m)
Length with Bucket on Ground	22 ft (7 m)
Max Lift Height	12 ft (4 m)
Reach at Max Height and Dump	3 ft (1 m)
Reach at Max Lift and Dump	4 ft (1 m)
Wheelbase	10 ft (3 m)
Width Over Tires	8 ft (2 m)

Engine

Max Torque	540 lbs ft (732 nm)
Number of Cylinders	6
Power Measured @	2200 rpm

Hydraulic System

Lower Time	2.7 seconds
Raise Time	4.4 seconds
Relief Valve Setting	3625 psi

Operating Specifications

Alternator Supplied Amperage	70 amps
Engine Oil Capacity	4 gal (14 l)
Engine Oil Fluid Capacity	4 gal (14 l)
Front Axle/Diff Fluid Capacity	10 gal (39 l)
Front Diff Fluid Capacity	10 gal (39 l)
Operating Voltage	24 volts
Rear Axle/Diff Fluid Capacity	10 gal (37 l)
Rear Diff Fluid Capacity	10 gal (37 l)
Static Tipping Load - Bucket	23,153 lbs (10,502 kg)
Static Tipping Load - Forks	17,024 lbs (7,722 kg)
Static Tipping Weight	19,996 lbs (9,070 kg)
Tire Size	20.5R25 XHA (L3)
Turning Radius	19 ft (6 m)

Transmission

Max Speed - Forward	24 mph (39 kph)
Max Speed - Reverse	15 mph (24 kph)
Max Speed Forward	24 mph (38 kph)
Max Speed Reverse	16 mph (25 kph)
Number of Forward Gears	4
Number of Reverse Gears	3

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon