- Category: Wheel Loaders ➔
- Manufacturer: JCB ➔
- Model: 457 ZX ➔
The JCB 457 ZX Wheel Loader is a powerhouse of efficiency and performance, boasting a maximum bucket breakout force of 38,667.2 lbs. With a spacious bucket capacity of 4.1 cu yd heaped and 3.7 cu yd struck, this loader offers outstanding productivity. Equipped with a turbocharged 6-cylinder diesel engine producing 258 hp, the JCB 457 ZX ensures top-tier performance while meeting EPA Tier 4 Final emission standards. From its quick hydraulics system to its comfortable cab design, this wheel loader is designed to tackle any task with ease and precision.
General Specifications
Bucket Capacity cu. yd. (cu m) | 4.6 (3.5) Starting 2024 Model Year |
Engine Power hp (kw) | 282 (210) Starting 2024 Model Year |
Engine type | Cummins QSB6.7 Starting 2024 Model Year |
Max Dump Height ft. (m) | 12.5 (3.8) Starting 2024 Model Year |
Operating Weight | 44090 (19,999) Starting 2024 Model Year |
Bucket
Breakout Force | 38,667 lbs (17,539 kg)
|
Bucket Capacity - heaped | 4 cu yd (3 cu m)
|
Bucket Capacity - struck | 4 cu yd (3 cu m)
|
Bucket Width | 9 ft (3 m)
|
Dump Clearance at Max Raise | 9 ft (3 m)
|
Dimensions
Ground Clearance | 2 ft (0 m)
|
Height - Top of Cab | 11 ft (3 m)
|
Hinge Pin - Max Height | 14 ft (4 m)
|
Length with Bucket on Ground | 26 ft (8 m)
|
Reach at Max Lift and Dump | 4 ft (1 m)
|
Wheelbase | 11 ft (3 m)
|
Width Over Tires | 9 ft (3 m)
|
Engine
Air cleaner | Intergrated pre-cleaner scavenged
|
Aspiration | Turbo Charged
|
Displacement | 470 cu in (7,700 cu cm)
|
Emission Tier Level | EPA 40 CFR 89 / Tier 4 Final EU 97/68/EC/STAGE IV
|
Engine Model | 6R1000
|
Engine Type | MTU
|
Fan drive type | Hydraulic
|
Gross Power | 258 hp (192 kw)
|
No. of Valves | 4
|
Number of Cylinders | 6
|
Power Measured @ | 1600 rpm
|
Torque Measured @ | 1600 rpm
|
Hydraulic System
3190.8 | 220 bar psi
|
Dump Time | 1.2 seconds
|
Lower Time | 4.1 seconds
|
Pump Flow Capacity | 41 gpm (153 lpm)
|
Pump Type | Variable displacement
|
Raise Time | 5.8 seconds
|
Relief Valve Setting | 3190 psi
|
Total cycle | 11.1 seconds
|
Operating Specifications
Alternator Supplied Amperage | 100 amps
|
Articulation Angle | 40 degrees
|
Cooling System Fluid Capacity | 11 gal (42 l)
|
DEF tank capacity | 11 gal (42 l)
|
Engine Oil Fluid Capacity | 7 gal (25 l)
|
Front Axle/Diff Fluid Capacity | 9 gal (35 l)
|
Fuel Capacity | 79 gal (300 l)
|
Full turn tipping load | 30,717 lbs (13,933 kg)
|
Hydraulic System Fluid Capacity | 36 gal (135 l)
|
Operating Voltage | 24 volts
|
Operating Weight | 43,594 lbs (19,774 kg)
|
Payload | 15,360 lbs (6,967 kg)
|
Rated Bucket Capacity | 4 cu yd (3 cu m)
|
Rear Axle Oscillation | 11.5 degrees
|
Rear Axle/Diff Fluid Capacity | 9 gal (35 l)
|
Transmission Fluid Capacity | 11 gal (41 l)
|
Turning Radius | 22 ft (7 m)
|
Transmission
Max Speed - Forward | 23 mph (36 kph)
|
Max Speed - Reverse | 15 mph (24 kph)
|
Number of Forward Gears | 4
|
Number of Reverse Gears | 3
|
Transmission Type | 4 speed non-lock up converter ZF 4WG210
|
Weights
Operational Weight | 42,289 lbs (19,182 kg)
|