- Category: Wheel Loaders ➔
- Manufacturer: John Deere ➔
- Model: 544G ➔
Introducing the John Deere 544G Wheel Loader, a powerhouse of efficiency and performance on the job site. With a bucket breakout force of 20342 lbs and a bucket capacity ranging from 2.3 to 2.7 cubic yards, this machine is built to handle a wide range of materials. Equipped with a turbocharged 6-cylinder engine and capable of delivering 125 horsepower, the 544G showcases impressive power and torque for superior productivity. Its hydraulic system operates smoothly with quick dump and raise times, while the spacious cab offers comfort and visibility for the operator. With a solid operating weight of 24092 lbs and various operating specifications to enhance its capabilities, the John Deere 544G is a reliable and efficient addition to any worksite.
General Specifications
Bucket
Breakout Force | 20,342 lbs (9,227 kg)
|
Bucket Capacity - heaped | 3 cu yd (2 cu m)
|
Bucket Capacity - struck | 2 cu yd (2 cu m)
|
Dimensions
Dump Clearance at Max Lift | 9 ft (3 m)
|
Fork Tine Length | 4 ft (1 m)
|
Ground Clearance | 1 ft (0 m)
|
Height - Top of Cab | 11 ft (3 m)
|
Hinge Pin Max Height | 12 ft (4 m)
|
Hook Height at Max Lift - extended | 22 ft (7 m)
|
Length w/ Bucket on Ground | 23 ft (7 m)
|
Length with out Forks on Ground | 25 ft (8 m)
|
Max Lift Height | 11 ft (3 m)
|
Reach at Max Height and Dump | 4 ft (1 m)
|
Wheelbase | 10 ft (3 m)
|
Width Over Tires | 8 ft (2 m)
|
Engine
Aspiration | Turbocharged
|
Displacement | 359 cu in (5,883 cu cm)
|
Engine Model | 6059T
|
Gross Power | 125 hp (93 kw)
|
Max Torque | 388 lbs ft (526 nm)
|
Net Power | 120 hp (89 kw)
|
Number of Cylinders | 6
|
Power Measured @ | 2200 rpm
|
Torque Measured @ | 1400 rpm
|
Hydraulic System
Dump Time | 1.4 seconds
|
Lower Time | 3.2 seconds
|
Pump Flow Capacity | 46 gpm (175 lpm)
|
Pump Type | Gear type
|
Raise Time | 5.8 seconds
|
Relief Valve Setting | 2750 psi
|
Operating Specifications
Alternator Supplied Amperage | 95 amps
|
Cooling System Fluid Capacity | 6 gal (24 l)
|
Engine Oil Capacity | 5 gal (19 l)
|
Front Diff Fluid Capacity | 5 gal (19 l)
|
Fuel Capacity | 58 gal (218 l)
|
Hydraulic System Fluid Capacity | 20 gal (76 l)
|
Operating Voltage | 12 volts
|
Operating Weight | 24,092 lbs (10,928 kg)
|
Rear Axle Oscillation | 22 degrees
|
Rear Diff Fluid Capacity | 5 gal (19 l)
|
Static Tipping Load - Bucket | 18,453 lbs (8,370 kg)
|
Static Tipping Load - Forks | 13,665 lbs (6,198 kg)
|
Static Tipping Load - Material Handler | 8,945 lbs (4,057 kg)
|
Tire Size | 17.5-25
|
Transmission Fluid Capacity | 3 gal (10 l)
|
Turning Radius | 16 ft (5 m)
|
Transmission
Max Speed Forward | 24 mph (38 kph)
|
Max Speed Reverse | 17 mph (27 kph)
|
Number of Forward Gears | 4
|
Number of Reverse Gears | 3
|
Transmission Type | Power shift
|