Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Breakout Force | 24,100 lbs (10,932 kg) |
Bucket Capacity - heaped | 3 cu yd (2 cu m) |
Bucket Capacity - struck | 2 cu yd (2 cu m) |
Dump Clearance at Max Lift | 10 ft (3 m) |
Fork Tine Length | 4 ft (1 m) |
Ground Clearance | 2 ft (0 m) |
Height - Top of Cab | 11 ft (3 m) |
Height at Hook Max Reach | 7 ft (2 m) |
Hinge Pin Max Height | 13 ft (4 m) |
Length w/ Bucket on Ground | 24 ft (7 m) |
Length with out Forks on Ground | 25 ft (8 m) |
Max Lift Height | 13 ft (4 m) |
Reach at Max Height and Dump | 4 ft (1 m) |
Wheelbase | 10 ft (3 m) |
Width Over Tires | 8 ft (2 m) |
Aspiration | turbocharged 7 intercooler |
Displacement | 359 cu in (5,883 cu cm) |
Engine Model | 6BTAA5.9 |
Max Torque | 401 lbs ft (544 nm) |
Net Power | 134 hp (100 kw) |
Number of Cylinders | 6 |
Power Measured @ | 2200 rpm |
Torque Measured @ | 1500 rpm |
Dump Time | 2.2 seconds |
Lower Time | 2.9 seconds |
Pump Flow Capacity | 28 gpm (105 lpm) |
Pump Type | gear type |
Raise Time | 5.8 seconds |
Relief Valve Setting | 3000 psi |
Alternator Supplied Amperage | 50 amps |
Cooling System Fluid Capacity | 11 gal (43 l) |
Engine Oil Capacity | 4 gal (16 l) |
Front Diff Fluid Capacity | 7 gal (25 l) |
Fuel Capacity | 59 gal (222 l) |
Hydraulic System Fluid Capacity | 27 gal (100 l) |
Operating Voltage | 24 volts |
Operating Weight | 26,411 lbs (11,980 kg) |
Rear Axle Oscillation | 12 degrees |
Rear Diff Fluid Capacity | 7 gal (25 l) |
Static Tipping Load - Bucket | 18,166 lbs (8,240 kg) |
Static Tipping Load - Forks | 13,603 lbs (6,170 kg) |
Static Tipping Load - Material Handler | 8,863 lbs (4,020 kg) |
Tire Size | 20.5x25-12PR (L-2) |
Transmission Fluid Capacity | 8 gal (30 l) |
Turning Radius | 19 ft (6 m) |
Max Speed Forward | 25 mph (40 kph) |
Max Speed Reverse | 25 mph (40 kph) |
Number of Forward Gears | 4 |
Number of Reverse Gears | 4 |
Transmission Type | full power shift |