Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Breakout Force | 25,180 lbs (11,421 kg) |
Bucket Capacity - heaped | 3 cu yd (2 cu m) |
Bucket Width | 8 ft (2 m) |
Dump Clearance at Max Raise | 9 ft (3 m) |
Ground Clearance | 2 ft (1 m) |
Height - Top of Cab | 11 ft (3 m) |
Hinge Pin - Max Height | 13 ft (4 m) |
Length with Bucket on Ground | 24 ft (7 m) |
Reach at Max Lift and Dump | 4 ft (1 m) |
Wheelbase | 10 ft (3 m) |
Air cleaner | Dry air filter with main and safety element pre-cleaner service indicator on the display |
Aspiration | Inline engine water-cooled exhaust-turbo charged with intercooler |
Bore | 4 in (11 cm) |
Displacement | 275 cu in (4,506 cu cm) |
Engine Model | 4045HFL93 |
Gross Power | 154 hp (115 kw) |
Max Torque | 454 lbs ft (616 nm) |
Number of Cylinders | 4 |
Power Measured @ | 2000 rpm |
Stroke | 5 in (13 cm) |
Torque Measured @ | 1600 rpm |
Dump Time | 1.6 seconds |
Lower Time | 4 seconds |
Pump Flow Capacity | 45 gpm (170 lpm) |
Pump Type | Load-Sensing vaiable axial piston pump with output control and pressure cutoff |
Raise Time | 5.3 seconds |
Relief Valve Setting | 4351.2 psi |
Alternator Supplied Amperage | 55 amps |
Cooling System Fluid Capacity | 10 gal (38 l) |
Engine Oil Fluid Capacity | 5 gal (20 l) |
Front Axle/Diff Fluid Capacity | 4 gal (16 l) |
Fuel Capacity | 54 gal (205 l) |
Hydraulic System Fluid Capacity | 48 gal (180 l) |
Operating Voltage | 24 volts |
Operating Weight | 27,029 lbs (12,260 kg) |
Rear Axle Oscillation | 12 degrees |
Rear Axle/Diff Fluid Capacity | 4 gal (15 l) |
Static Tipping Weight | 22,399 lbs (10,160 kg) |
Tire Size | 20.5R25 L3 |
Transmission Fluid Capacity | 1 gal (4 l) |
Turning Radius | 20 ft (6 m) |
Max Speed - Forward | 25 mph (40 kph) |
Max Speed - Reverse | 25 mph (40 kph) |
Number of Forward Gears | 3 |
Number of Reverse Gears | 3 |
Transmission Type | Stepless hydrostatic travel drive |