- Category: Wheel Loaders ➔
- Manufacturer: Liebherr ➔
- Model: L550 XPOWER ➔
The Liebherr L550 XPOWER Wheel Loader is a versatile and powerful machine designed for a wide range of tasks on construction sites, quarries, and material handling operations. With a bucket arm length of 8.6 feet, bucket breakout forces up to 37,095 pounds, and a heaped bucket capacity of up to 4.5 cubic yards, this wheel loader is capable of handling heavy loads with ease. Powered by a 219 horsepower engine and featuring advanced hydraulic systems for efficient operation, the Liebherr L550 XPOWER offers exceptional performance and reliability for demanding work environments.
General Specifications
Bucket
Arm length | 9 ft (3 m)
|
Breakout Force | 28,101 lbs (12,747 kg)
|
Bucket Capacity - heaped | 4 cu yd (3 cu m)
|
Bucket Width | 8 ft (2 m)
|
Digging depth | 3 ft (1 m)
|
Dump Clearance at Max Raise | 10 ft (3 m)
|
Dimensions
Ground Clearance | 2 ft (1 m)
|
Height - Top of Cab | 11 ft (3 m)
|
Hinge Pin - Max Height | 13 ft (4 m)
|
Length with Bucket on Ground | 28 ft (9 m)
|
Reach at Max Lift and Dump | 4 ft (1 m)
|
Wheelbase | 11 ft (3 m)
|
Electrical System
Alternator | 28/140 (V/A)
|
Battery | 2 x 180 Ah
|
Starter | 24/10.5 (V/HP)
|
Voltage | 24 V
|
Engine
Air cleaner | Dry type filter with main and safety element pre-cleaner service indicator on the Liebherr display
|
Aspiration | Water-cooled in-line engine with charge-air cooling exhaust after-treatment through Liebherr-SCR technology
|
Bore | 5 in (12 cm)
|
Displacement | 428 cu in (7,014 cu cm)
|
Engine Model | D934 A7
|
Engine Power | 219-219 hp (163-163 kw) |
Fuel injection | Electronic Common Rail high-pressure injection
|
Gross Power | 192 hp (143 kw)
|
Max Torque | 896 lbs ft (1,215 nm)
|
Net Power | 163-163 kw (219-219 hp) |
Number of Cylinders | 4
|
Power Measured @ | 1800 rpm
|
Stroke | 6 in (15 cm)
|
Torque Measured @ | 1100 rpm
|
Hydraulic System
Dump Time | 2.3 seconds
|
Lower Time | 2.7 seconds
|
Pump Flow Capacity | 62 gpm (235 lpm)
|
Pump Type | Load-sensing variable axial piston pump with output and flow control and pressure cut-off in the control block
|
Raise Time | 5.5 seconds
|
Relief Valve Setting | 4351.2 psi
|
Operating Specifications
Cooling System Fluid Capacity | 18 gal (67 l)
|
Engine Oil Fluid Capacity | 7 gal (26 l)
|
Front Axle/Diff Fluid Capacity | 9 gal (35 l)
|
Fuel Capacity | 74 gal (280 l)
|
Hydraulic Fluid Capacity | 28 gal (105 l)
|
Hydraulic System Fluid Capacity | 46 gal (175 l)
|
Operating Weight | 39,020 lbs (17,699 kg)
|
Rear Axle/Diff Fluid Capacity | 9 gal (35 l)
|
Static Tipping Weight | 27560-27 lbs (12,501-12 kg) |
Tire Size | 23.5R25 L3
|
Turning Radius | 22 ft (7 m)
|