Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Arm length | 10 ft (3 m) |
Breakout Force | 44,960 lbs (20,393 kg) |
Bucket Capacity - heaped | 6 cu yd (4 cu m) |
Bucket Width | 9 ft (3 m) |
Digging depth | 4 ft (1 m) |
Dump Clearance at Max Raise | 11 ft (3 m) |
Ground Clearance | 2 ft (1 m) |
Height - Top of Cab | 12 ft (4 m) |
Hinge Pin - Max Height | 14 ft (4 m) |
Length with Bucket on Ground | 30 ft (9 m) |
Reach at Max Lift and Dump | 3 ft (1 m) |
Wheelbase | 12 ft (4 m) |
Alternator | 28/180 (V/A) |
Battery | 2 x 180 Ah |
Starter | 24/10.5 (V/HP) |
Voltage | 24 V |
Air cleaner | Dry type filter with main and safety element pre-cleaner service indicator on the Liebherr display |
Aspiration | Water-cooled in-line engine with charge-air cooling exhaust after-treatment through Liebherr-SCR technology |
Bore | 5 in (12 cm) |
Displacement | 642 cu in (10,521 cu cm) |
Engine Model | D936 A7 |
Fuel injection | Electronic Common Rail high-pressure injection |
Gross Power | 272 hp (203 kw) |
Max Torque | 1,409 lbs ft (1,910 nm) |
Net Power | 268 hp (200 kw) |
Number of Cylinders | 6 |
Power Measured @ | 1800 rpm |
Stroke | 6 in (15 cm) |
Torque Measured @ | 1100 rpm |
Dump Time | 2 seconds |
Lower Time | 3.5 seconds |
Pump Flow Capacity | 77 gpm (291 lpm) |
Pump Type | Load-sensing variable axial piston pump with output and flow control and pressure cut-off in the control block |
Raise Time | 5.5 seconds |
Relief Valve Setting | 4351.2 psi |
Cooling System Fluid Capacity | 19 gal (73 l) |
Engine Oil Fluid Capacity | 11 gal (40 l) |
Front Axle/Diff Fluid Capacity | 11 gal (42 l) |
Fuel Capacity | 96 gal (363 l) |
Hydraulic Fluid Capacity | 28 gal (105 l) |
Hydraulic System Fluid Capacity | 50 gal (190 l) |
Operating Weight | 52,690 lbs (23,900 kg) |
Rear Axle/Diff Fluid Capacity | 11 gal (42 l) |
Static Tipping Weight | 35,055 lbs (15,901 kg) |
Tire Size | 26.5R25 L3 |
Turning Radius | 24 ft (7 m) |
Max Speed - Forward | 25 mph (40 kph) |
Max Speed - Reverse | 25 mph (40 kph) |