Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Arm length | 10 ft (3 m) |
Breakout Force | 53,954 lbs (24,473 kg) |
Bucket Capacity - heaped | 8 cu yd (6 cu m) |
Bucket Width | 11 ft (3 m) |
Digging depth | 4 ft (1 m) |
Dump Clearance at Max Raise | 11 ft (3 m) |
Ground Clearance | 1 ft (0 m) |
Height - Top of Cab | 12 ft (4 m) |
Hinge Pin - Max Height | 15 ft (5 m) |
Length with Bucket on Ground | 33 ft (10 m) |
Reach at Max Lift and Dump | 5 ft (1 m) |
Wheelbase | 12 ft (4 m) |
Alternator | 28/180 (V/A) |
Battery | 2 x 180 Ah |
Starter | 24/10.5 (V/HP) |
Voltage | 24 V |
Air cleaner | Dry type filter with main and safety element pre-cleaner service indicator on the Liebherr display |
Aspiration | Water-cooled in-line engine with charge-air cooling exhaust after-treatment through Liebherr-SCR technology |
Bore | 5 in (12 cm) |
Displacement | 642 cu in (10,521 cu cm) |
Engine Model | D936 A7 |
Fuel injection | Electronic Common Rail high-pressure injection |
Gross Power | 353 hp (263 kw) |
Max Torque | 1,450 lbs ft (1,966 nm) |
Net Power | 349 hp (260 kw) |
Number of Cylinders | 6 |
Power Measured @ | 1800 rpm |
Stroke | 6 in (15 cm) |
Torque Measured @ | 1100 rpm |
Dump Time | 3 seconds |
Lower Time | 4 seconds |
Pump Flow Capacity | 108 gpm (409 lpm) |
Pump Type | Load-sensing variable axial piston pump with output and flow control and pressure cut-off in the control block |
Raise Time | 6.5 seconds |
Relief Valve Setting | 4351.2 psi |
Cooling System Fluid Capacity | 19 gal (73 l) |
Engine Oil Fluid Capacity | 11 gal (40 l) |
Front Axle/Diff Fluid Capacity | 16 gal (60 l) |
Fuel Capacity | 132 gal (500 l) |
Hydraulic Fluid Capacity | 25 gal (95 l) |
Hydraulic System Fluid Capacity | 56 gal (210 l) |
Operating Weight | 71,870 lbs (32,600 kg) |
Rear Axle/Diff Fluid Capacity | 16 gal (60 l) |
Static Tipping Weight | 47,620 lbs (21,600 kg) |
Tire Size | 29.5R25 L3 |
Turning Radius | 28 ft (8 m) |
Max Speed - Forward | 21 mph (33 kph) |
Max Speed - Reverse | 21 mph (33 kph) |