Categories ↠ Wheel Loaders ↠ Mecalac AS 1600

Mecalac AS 1600 Wheel Loader

Category: Wheel Loaders ➔
Manufacturer: Mecalac ➔
Model: AS 1600 ➔

General Specifications

Bucket

Breakout force	8000 newton
Dumping angle, top	53 degrees
Lifting force	6900 newton
Payload on forks, max. turned, frontal	9,094 lbs (4,125 kg)
Payload on forks, max. turned, max. swivelled	8,697 lbs (3,945 kg)
Thrust force	9000 newton
Tilting angle	45 degrees
Tipping load Standard bucket	13,228 lbs (6,000 kg)
Tipping load Standard bucket, max. turned, 90	13,250 lbs (6,010 kg)

Dimensions

Ground Clearance	2 ft (0 m)
Height - Top of Cab	10 ft (3 m)
Length with Bucket on Ground	22 ft (7 m)
Turning Radius	14 ft (4 m)
Wheelbase	8 ft (2 m)

Engine

Alternator	120 amps
Battery	2 x 95 Ah
Engine Model	TCD 36 L4
Net Power	136 hp (101 kw)
Power Measured @	2200 rpm
Torque Measured @	1600 rpm

Operating Specifications

Engine Oil Fluid Capacity	2 gal (8 l)
Front Axle/Diff Fluid Capacity	6 gal (21 l)
Fuel Capacity	40 gal (150 l)
Hydraulic System Fluid Capacity	42 gal (160 l)
Operating Voltage	24 volts
Operating Weight	24,075 lbs (10,920 kg)
Rear Axle Oscillation	10 degrees
Rear Axle/Diff Fluid Capacity	5 gal (19 l)
Steering Angle	35 degrees
Tire Size	175-25

Transmission

Max Speed - Forward

13 mph (20 kph)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon