Categories ↠ Wheel Loaders ↠ Volvo L150H

Volvo L150H Wheel Loader

Category: Wheel Loaders ➔
Manufacturer: Volvo ➔
Model: L150H ➔

The Volvo L150H Wheel Loader is a powerhouse of a machine with impressive capabilities and performance. Equipped with a Volvo D13J engine and advanced hydraulic system, this loader boasts a breakout force of 53077.4 lbs and a maximum bucket dump clearance of 9.9 ft. With a focus on efficiency and reliability, the L150H is designed for heavy-duty applications, making it a top choice for demanding construction and material handling tasks.

See all Volvo L150Hs for sale

General Specifications

?Model	L150H Starting 2024 Model Year
Bucket Capacity cu. yd. (cu m)	3.5 - 12.4 (2.7 - 9.5) Starting 2016 Model Year
Engine Power hp (kw)	300 (224) Starting 2016 Model Year
Engine type	D13J Starting 2017 Model Year
Max Dump Height ft. (m)	9.9 (3) Starting 2016 Model Year
Operating?Weight	55,320 (25,093) Starting 2017 Model Year

Axles

Axle oil front	12 gal (46 l)
Axle oil rear	15 gal (55 l)
Front	Volvo AWB 40B
Rear	Volvo AWB 40C
Rear axle oscillation	15 degrees

Bucket

Breakout Force	53,077 lbs (24,076 kg)
Dump Clearance at Max Raise	10 ft (3 m)

Dimensions

Ground Clearance	2 ft (1 m)
Height - Top of Cab	12 ft (4 m)
Hinge Pin - Max Height	14 ft (4 m)
Length with Bucket on Ground	29 ft (9 m)
Wheelbase	12 ft (4 m)
Width Over Tires	10 ft (3 m)

Drive System

Torque multiplication, stall ratio	2.09:1
Transmission	Volvo HTL 223
Transport speed, maximum	24 mph (38 kph)

Electrical System

Alternator rating	2280/80 (W/A)
Battery capacity	2 x 170 Ah
Cold cranking capacity	1000 A
Starter motor output	9 hp (7 kw)
Voltage	24 V

Engine

Aspiration	Turbocharged
Displacement	781 cu in (12,802 cu cm)
Engine Model	Volvo D13J
Gross Power	295 hp (220 kw)
Make	Volvo
Net Power	295 hp (220 kw)
Number of Cylinders	6
Power Measured @	1300 rpm
Torque Measured @	1000 rpm

Hydraulic cycle times (unloaded)

Lift	5.9 seconds
Lower	3.7 seconds
Tilt	2 seconds
Total cycle time	11.6 seconds

Hydraulic System

Engine speed	1900 rpm
Working pressure	Pump 1 - 29 MPa Pump 2 - 31 MPa Pump 3 - 25 MPa

Operating Specifications

Cooling System Fluid Capacity	15 gal (55 l)
DEF tank capacity	8 gal (31 l)
Engine Oil Fluid Capacity	13 gal (50 l)
Fuel Capacity	97 gal (366 l)
Hydraulic System Fluid Capacity	41 gal (156 l)
Rated Bucket Capacity	4-16 cu yd (3-12 cu m)
Transmission Fluid Capacity	13 gal (48 l)

Steering System

Articulation angle	37 degrees
Cylinder bore	4 in (10 cm)
Maximum flow	53 gpm (202 lpm)
Rod diameter	2 in (6 cm)
Steering cylinders	2
Stroke	1 ft (0 m)
Working pressure	21 MPa 210 bar

Weights

Operational Weight

46000-52,000 lbs (20,865-23,587 kg)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon