- Category: Wheel Loaders ➔
- Manufacturer: Volvo ➔
- Model: L180H ➔
The Volvo L180H Wheel Loader is a powerful and efficient machine designed for heavy-duty applications. With a gross power of 329.9 horsepower and an impressive bucket breakout force of 53,077.4 pounds, this loader can handle large loads with ease. From its turbocharged engine to its advanced hydraulic system, every component of the L180H is engineered for top performance and reliability. Whether lifting, dumping, or tilting, this wheel loader delivers quick cycle times and smooth operation, making it an essential tool for construction, mining, and other demanding industries.
General Specifications
?Model | L180H Starting 2024 Model Year |
Bucket Capacity cu. yd. (cu m) | 3.5 - 12.4 (2.7 - 9.5) Starting 2016 Model Year |
Engine Power hp (kw) | 333 (248) Starting 2016 Model Year |
Engine type | D13J Starting 2017 Model Year |
Max Dump Height ft. (m) | 10 (3.0) Starting 2019 Model Year |
Operating?Weight | 61,890 (28,073) Starting 2017 Model Year |
Axles
Axle oil front | 12 gal (46 l)
|
Axle oil rear | 15 gal (55 l)
|
Front | Volvo AWB 40B
|
Rear | Volvo AWB 40B
|
Rear axle oscillation | 15 degrees
|
Bucket
Breakout Force | 53,077 lbs (24,076 kg)
|
Dump Clearance at Max Raise | 10 ft (3 m)
|
Dimensions
Ground Clearance | 2 ft (1 m)
|
Height - Top of Cab | 12 ft (4 m)
|
Hinge Pin - Max Height | 29 ft (9 m)
|
Length with Bucket on Ground | 32 ft (10 m)
|
Wheelbase | 2 ft (0 m)
|
Width Over Tires | 10 ft (3 m)
|
Drive System
Torque multiplication, stall ratio | 2.09:1
|
Transmission | Volvo HTL 223
|
Transport speed, maximum | 24 mph (38 kph)
|
Electrical System
Alternator rating | 2280/80 (W/A)
|
Battery capacity | 2 x 170 Ah
|
Cold cranking capacity | 1000 A
|
Starter motor output | 9 hp (7 kw)
|
Voltage | 24 V
|
Engine
Aspiration | Turbocharged
|
Displacement | 781 cu in (12,802 cu cm)
|
Engine Model | Volvo D13J
|
Gross Power | 330 hp (246 kw)
|
Make | Volvo
|
Net Power | 329 hp (245 kw)
|
Number of Cylinders | 6
|
Power Measured @ | 1400 rpm
|
Torque Measured @ | 1000 rpm
|
Hydraulic cycle times (unloaded)
Lift | 6.4 seconds
|
Lower | 3.3 seconds
|
Tilt | 1.8 seconds
|
Total cycle time | 11.5 seconds
|
Hydraulic System
Engine speed | 1900 rpm
|
Working pressure | Pump 1 - 20 MPa Pump 2 - 21 MPa
|
Operating Specifications
Cooling System Fluid Capacity | 15 gal (55 l)
|
DEF tank capacity | 8 gal (31 l)
|
Engine Oil Fluid Capacity | 13 gal (50 l)
|
Fuel Capacity | 97 gal (366 l)
|
Hydraulic System Fluid Capacity | 41 gal (156 l)
|
Rated Bucket Capacity | 4.8-18 cu yd (4-14 cu m) |
Transmission Fluid Capacity | 13 gal (48 l)
|
Steering System
Articulation angle | 37 degrees
|
Cylinder bore | 4 in (10 cm)
|
Maximum flow | 53 gpm (202 lpm)
|
Rod diameter | 2 in (6 cm)
|
Steering cylinders | 2
|
Stroke | 2 ft (1 m)
|
Working pressure | 21 MPa 210 bar
|
Weights
Operational Weight | 52000-59,400 lbs (23,587-26,943 kg) |