- Category: Wheel Loaders ➔
- Manufacturer: Volvo ➔
- Model: L90H ➔
The Volvo L90H Wheel Loader is a powerful and reliable machine designed for efficient and productive operation on construction sites. With a strong breakout force of 31,203.5 lbs and a maximum transport speed of 28.5 mph, this wheel loader delivers impressive performance. Equipped with a turbocharged Volvo D6J engine producing 184 hp, the L90H also boasts a spacious cab with comfortable amenities for operators. From its hydraulic system with quick cycle times to its robust steering system and sturdy axles, this wheel loader is built to handle a variety of tasks with ease.
General Specifications
?Model | L90H Starting 2024 Model Year |
Bucket Capacity cu. yd. (cu m) | 2.7 - 9.2 (2.1 - 7) Starting 2016 Model Year |
Engine Power hp (kw) | 186 (139) Starting 2021 Model Year |
Engine type | D6J Starting 2017 Model Year |
Max Dump Height ft. (m) | 9.3 (2.8) Starting 2016 Model Year |
Operating?Weight | 32,220 (14,615) Starting 2016 Model Year |
Axles
Axle oil front | 9 gal (35 l)
|
Axle oil rear | 7 gal (27 l)
|
Front | Volvo AWB 25
|
Rear | Volvo AWB 20
|
Rear axle oscillation | 13 degrees
|
Bucket
Breakout Force | 31,204 lbs (14,154 kg)
|
Dump Clearance at Max Raise | 10 ft (3 m)
|
Dump Clearance at Max Raise | 9 ft (3 m)
|
Dimensions
Ground Clearance | 2 ft (0 m)
|
Height - Top of Cab | 11 ft (3 m)
|
Hinge Pin - Max Height | 13 ft (4 m)
|
Length with Bucket on Ground | 25 ft (8 m)
|
Wheelbase | 10 ft (3 m)
|
Width Over Tires | 8 ft (2 m)
|
Drive System
Torque multiplication, stall ratio | 2.5:1 Non Lock-up / 2.59:1 Lock-up
|
Transmission | Volvo HTE 125C Non Lock-up / HTE 125 Lock-up
|
Transport speed, maximum | 29 mph (46 kph)
|
Electrical System
Alternator rating | 3135/80 (W/A)
|
Battery capacity | 2 x 110 Ah
|
Cold cranking capacity | 1000 A
|
Starter motor output | 7 hp (6 kw)
|
Voltage | 24 V
|
Engine
Aspiration | Turbocharged
|
Displacement | 348 cu in (5,701 cu cm)
|
Engine Model | Volvo D6J
|
Gross Power | 184 hp (137 kw)
|
Net Power | 184 hp (137 kw)
|
Number of Cylinders | 6
|
Power Measured @ | 1900 rpm
|
Torque Measured @ | 1400 rpm
|
Hydraulic cycle times (unloaded)
Lift | 5.4 seconds
|
Lower | 3.2 seconds
|
Tilt | 1.9 seconds
|
Total cycle time | 10.5 seconds
|
Hydraulic System
Engine speed | 1900 rpm
|
Working pressure | Pump 2 - 31 MPa Pump 3 - 21 MPa
|
Operating Specifications
Cooling System Fluid Capacity | 8 gal (30 l)
|
DEF tank capacity | 5 gal (20 l)
|
Engine Oil Fluid Capacity | 5 gal (20 l)
|
Fuel Capacity | 59 gal (222 l)
|
Hydraulic System Fluid Capacity | 24 gal (90 l)
|
Rated Bucket Capacity | 2.9-9 cu yd (2-7 cu m) |
Transmission Fluid Capacity | 6 gal (22 l)
|
Steering System
Articulation angle | 40 degrees
|
Cylinder bore | 3 in (8 cm)
|
Maximum flow | 16 gpm (60 lpm)
|
Rod diameter | 2 in (5 cm)
|
Steering cylinders | 2
|
Stroke | 1 ft (0 m)
|
Working pressure | 21 MPa 210 bar
|
Weights
Operational Weight | 33,030 lbs (14,982 kg)
|