Machine description: SOLD--Ingersoll Rand ECM660-III Crawler Hydraulic Drill w/ Cummins, AC cab, T51 rod changer, lube system, dust suppression system... more info about the 2005 Ingersoll Rand ECM660 III.
Machine description: EROPS, AC, HEAT, CUMMINS 6CTHA8.3 ENGINE, 13" STEEL TRACKS, 30° GRADEABILITY, HC160 REVERSE HYD. DRIFTER, STRATA SENSE DRILLING AUTOMATICS, 350CFM AIR COMPRESSOR, AIR VACUUM DUST COLLECTOR, AUTO ROD ... more info about the 2005 Ingersoll Rand ECM660 III.
Machine description: - Equipped with YH80A Drifter, - Repairs needed or in the process of being repaired, - Dust collector top new part has been fabricated need's installed, - Rod changer arm is broken have new parts to... more info about the 2006 Ingersoll Rand ECM590.
Machine description: - Equipped with YH80A Drifter, - Mechanic believes there is a broken pin in the fuel injection pump machine will idle but will not idle up., - Other repairs needed are inoperable fuel stop solenoid... more info about the 2004 Ingersoll Rand ECM590.
Machine description: - Equipped with YH80A Drifter, - Unit needs nothing is currently running on a job at this time., - Has newer paint job, - Manual rod changer, - Long boom... more info about the 2000 Ingersoll Rand ECM590.
Machine description: - Equipped with YH80A Drifter, - Ready to work, - Repairs needed are one door with broken hinges, - Fuel stop solenoid, - This machine has a new air end and has less than 200 hours on hydraulic pump... more info about the 1997 Ingersoll Rand ECM590.
Machine description: - Equipped with YH80A Drifter, -Only known issue is the engine Boggs down under a hydraulic pressure load everything works as intended but noticeable lack of performance due to lower engine rpm's . Po... more info about the 1999 Ingersoll Rand ECM590.
Machine description: - Comes with YH70, not currently installed but will be mounted for transport, - Batteries need charging or replaced so could not stand machine up at time of photos., - Missing wall and doors need to ... more info about the 2003 Ingersoll Rand ECM590.
Machine description: - Comes with YH70 not currently installed but will be mounted for transport, - This unit has tracking issues will move but unknown if it's the final drives or hydraulic motors., - Hammer needs to be ... more info about the 2004 Ingersoll Rand ECM590.
Machine description: 3.5 - 4.5 Inch Class*, HCR120 Drifter w/ 2287 Percussion Hours*, Cummins Diesel w/ 5,828 Hours*, Enclosed Cab w/ AC, Set Up for T51, Rod Changer w/ One-Lever Control... more info about the 2002 Ingersoll Rand ECM660 II.
Machine description: 3.5 - 4.5 Inch Class*, HC160R Drifter w/ Only 82 Percussion Hours since Rebuild*, Cummins Diesel Engine*, 7572 Engine Hours, 2517 Percussion Hours, Extendable Boom, Digital Angle Indicator, Auto Rod C... more info about the 2005 Ingersoll Rand ECM660 III.
Machine description: 3.5 - 4.5 Inch Class*, HC158 Drifter*, 5950 total frame hours*, 844 percussion hours, Overall unit is in excellent condition., Will be cleaned at time of sale.... more info about the 2011 Ingersoll Rand ECM660 IV.
Machine description: 3.5 - 4.5 Inch Class*, HC200A Drifter*, CATERPILLAR 3306 Diesel Engine*, Extendable Boom, Onboard Ingersoll-Rand 420 CFM @ 150 PSI Air Compressor, Rod Changer, Ready to ROCK & ROLL!... more info about the 1999 Ingersoll Rand ECM690.
Machine description: 4.5” – 5.5” Inch Class*, CATERPILLAR Diesel Engine*, YH Series Drifter*, YH110V Hydraulic Drifter, Set up for T51, CAT 3306 Diesel Engine, Extendable Boom, Rod Changer... more info about the 1996 Ingersoll Rand ECM690.
Machine description: Montabert HC200A Drifter - '0' hours on fresh service, CAT Engine, Set up for 60mm drill steel, Onboard Air of 480 CFM @ 150 PSI, 5500 total frame hours, 2012 percussion hours w/ '0' hours on new serv... more info about the 2007 Ingersoll Rand ECM720.
Machine description: 4.5 - 5.5 Inch Class*, Montabert HC200A Drifter*, Cat C11 Engine*, Set up for 60mm drill steel, Only 3570 Total Hours... more info about the 2008 Ingersoll Rand ECM720.
Machine description: 4.5” – 5.5” Inch Class*, CAT C11 Diesel Engine*, HC200A Drifter set up for GT60 Rods*, Caterpillar C11 Diesel Engine, Montabert HC200A drifter., Recent new hydraulic Pump, Aprox. 11800 total fr... more info about the 2007 Ingersoll Rand ECM720.
